Products and solutions

Etching primer

Paint VoyagerReference ID 1-002Primers

Related keywords

PrimersPaint Voyager

Overview / Summary Note

Connect steel and the coating system with a thin primer layer.

An etching primer that promotes adhesion to the steel surface. It forms a thin coating film as a basis for subsequent anticorrosive coating. This coating is used by combining a base component and an additive; its role in the process differs from that of conversion-treatment chemicals used in pretreatment tanks.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this when selecting a shop primer for steel or protecting coated surfaces during a long fabrication process.

Because this primer is used as a thin film, applying it more thickly does not necessarily increase protection. Check the topcoat type, drying state, and contact with moisture during storage together.

Main applications and requirements

  • Shop primer for steel
  • Establishing adhesion before anticorrosive coating
  • Connecting fabrication and storage with the main coating process

Characteristics and mechanisms

01

Promote adhesion to metal surfaces

A thin film is formed on a clean steel surface to prepare the substrate for subsequent coating.

02

Mix the two materials accurately

Manage the mixing ratio of the base component and specified additive, and the usable time after mixing.

03

Account for humidity and storage conditions

Application in high humidity or contact with moisture during storage can cause whitening, rust formation, and poor adhesion.

Basic information and general technical explanation

Manage etching primers through thin-film application and drying

An etching primer is a thin primer layer that prepares the interface with the substrate. Applying it over a surface that still contains oil or rust does not eliminate the need for surface preparation.

Overcoating before sufficient drying or stacking steel sheets while damp may cause defects. Check topcoat compatibility and recoating intervals against the coating specification actually being adopted.

Checks for selection and introduction

Evaluate the complete set of conditions, from surface preparation to storage and topcoating.

Conditions to check when selecting

  • Base-component/additive mixing ratio and pot life
  • Specified film thickness, humidity, and condensation on the surface to be coated
  • Topcoat type, recoating interval, and contact with moisture during storage

Support from CoatureVietnam

Please share the steel, surface preparation, storage period, and planned topcoat. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Why apply paint in multiple layers?

Introduces the roles of primers and topcoats and their combination within the complete coating system.

Related trouble prevention and remedies

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To examine primer adhesion through substrate surface condition, preparation and wettability.

Process and application relevance02-003

Paints That Dry and Paints That Harden by Reaction: The Difference Between Drying and Curing

Why read this: To distinguish drying from curing and check the conditions specified for the product concerned.

Process and application relevance11-003

A Coating Film Is More Than One Layer—How Primers, Intermediate Coats, and Topcoats Share Their Functions

Why read this: To clarify the roles of primer, intermediate coat and topcoat and their combination in the complete coating system.

Common consultation questions

Can it be used in the same way as a conversion-treatment chemical?

The methods of use differ. This is a primer applied as a coating and cannot be substituted for a chemical added to a treatment tank.

Consultation and inquiries

Please share the steel, surface preparation, storage period, and planned topcoat. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the steel, surface preparation, storage period, and planned topcoat
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-002

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.