Products and solutions

Epoxy and polyester primers for metals

Paint VoyagerReference ID 1-030Primers

Related keywords

PrimersPaint Voyager

Overview / Summary Note

Check suitability from the primer onward, including for light metals.

A group of epoxy and polyester primers for metal parts. Check suitability for magnesium alloys, aluminum, stainless steel, and other substrates for each product. They provide substrate adhesion and connection to the topcoat and are selected separately from conversion-treatment chemicals.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these when topcoats peel from light-metal parts or when organizing coating systems for different metal substrates.

Align alloy type, surface condition, baking after priming, and the planned topcoat. Evaluate the completed film as well as standalone adhesion tests.

Main applications and requirements

  • Priming light-metal and steel parts
  • Considering suitability for magnesium, aluminum, and stainless steel
  • Evaluating adhesion and durability in combination with the topcoat

Characteristics and mechanisms

01

Check adhesion for each alloy

Evaluate differences in alloy type and surface condition even when the material name is the same.

02

A layer connecting to the topcoat

Check the primer's curing state and its combination with subsequent films.

03

Specifications including pretreatment

Coordinate degreasing, surface treatment, and priming as a single process.

Basic information and general technical explanation

Check primer suitability on both the substrate and topcoat sides

Oxide films or machining oil may remain on light-metal surfaces, and adhesion varies with alloy and treatment conditions. It is important not to extend published results for a particular alloy to all alloys.

Also evaluate the effects of following primer baking with topcoat drying or baking. Check water and moisture resistance on the completed film, including the interfaces between layers.

Checks for selection and introduction

Evaluate with a clearly defined combination of alloy, surface treatment, and topcoat.

Conditions to check when selecting

  • Alloy type, fabrication method, degreasing, and surface treatment
  • Primer curing conditions and topcoat compatibility
  • Adhesion after wet exposure, corrosion resistance, and process reproducibility

Support from CoatureVietnam

Please share the metal and alloy types, pretreatment, and planned topcoat. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Why apply paint in multiple layers?

Introduces the roles of primers and topcoats and their combination within the complete coating system.

Related trouble prevention and remedies

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To examine primer adhesion through substrate surface condition, preparation and wettability.

Process and application relevance02-003

Paints That Dry and Paints That Harden by Reaction: The Difference Between Drying and Curing

Why read this: To distinguish drying from curing and check the conditions specified for the product concerned.

Process and application relevance11-003

A Coating Film Is More Than One Layer—How Primers, Intermediate Coats, and Topcoats Share Their Functions

Why read this: To clarify the roles of primer, intermediate coat and topcoat and their combination in the complete coating system.

Common consultation questions

Can a primer that worked on aluminum also be used on magnesium?

Check suitability for the relevant alloy individually. Evaluate on actual materials, including pretreatment and topcoat.

Consultation and inquiries

Please share the metal and alloy types, pretreatment, and planned topcoat. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the metal and alloy types, pretreatment, and planned topcoat
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-030

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.