Products and solutions

Dry-film lubricating and waterborne lubricating coatings

Paint VoyagerReference ID 1-031Lubricating and non-stick coatings

Related keywords

Lubricating and non-stick coatingsPaint Voyager

Overview / Summary Note

Provide a dry lubricating film on contact surfaces where oil is difficult to use.

A group of coatings using films containing solid lubricating components to address friction and wear in sliding areas. Distinguish fluoropolymer dry films from separate waterborne families, and select according to the mating material, load, temperature, and part curing conditions.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these for parts where sticky oil or grease, adhering dirt, or difficulty with replenishment is an issue.

Low friction, wear resistance, and non-stick performance are different evaluations, so define the improvement sought and check through actual movement.

Main applications and requirements

  • Sliding and contact surfaces of machine parts
  • Lubrication of parts where oil or grease is difficult to use
  • Comparing materials and curing processes, including waterborne systems

Characteristics and mechanisms

01

Form a film containing solid lubricating components

A method of adjusting contact conditions at the surface of a dry coating film.

02

Select a resin system suited to the parts

Separate conditions for baking types for metals, reaction-curing types for plastics, and other types.

03

Check waterborne systems under separate specifications

Check formulation design, target substrates, and marketed specifications; do not group them together with fluoropolymer systems.

Basic information and general technical explanation

Friction coefficient alone does not determine part life

Friction and wear depend on contacting materials, load, speed, temperature, and lubricating-film thickness. Do not transfer one test value to every condition in actual equipment; evaluate operational stability and film consumption.

Dry-film maintenance is not the same as replenishing oil. Check substrate adhesion, baking or curing, and dimensional changes, and also define the approach to necessary repair and replacement.

Checks for selection and introduction

Narrow down candidates from contact conditions and allowable part temperature, then evaluate through actual operation.

Conditions to check when selecting

  • Mating material, load, speed, temperature, and operating cycles
  • Metal or plastic substrate, pretreatment, and curing conditions
  • Requirements for wear, abnormal noise, non-stick performance, and dimensions

Support from CoatureVietnam

Please share the contacting parts, movement, load, temperature, and current lubrication method. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related trouble prevention and remedies

Reference for selection and evaluation05-002

Decide What the Coating Film Must Achieve Before Selecting Paint

Why read this: To clarify the application and required performance by considering what the coating film needs to achieve.

Condition to check: Confirm guaranteed values for individual functions in the product documentation

Reference for selection and evaluation02-009

How to Read Test Data Correctly: Specification Values Alone Cannot Resolve Shop-Floor Problems

Why read this: To examine functional evaluation through test methods and actual service conditions.

Condition to check: This article does not provide performance data for an individual product

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To check the substrate, surface preparation, film thickness and adhesion conditions.

Common consultation questions

Do waterborne lubricating coatings have the same design as fluoropolymer systems?

They are separate families. Check composition, target substrate, curing, and current supply specifications, and do not substitute them on the assumption of identical performance.

Consultation and inquiries

Please share the contacting parts, movement, load, temperature, and current lubrication method. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the contacting parts, movement, load, temperature, and current lubrication method
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-031

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.