Products and solutions

Coatings for rubber and soft substrates

Paint VoyagerReference ID 1-032Flexible coatings

Related keywords

Flexible coatingsPaint Voyager

Overview / Summary Note

Use a film that accommodates bending on flexible substrates.

Flexible coatings for rubber, elastomers, soft plastics, and similar substrates. Consider their ability to accommodate substrate deformation, adhesion, tactile feel, and appearance. Select separately between families emphasizing flexibility and those providing a soft touch.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these when a film cracks as a soft part is bent, or when reviewing the finish including tactile feel and appearance.

The required film varies with rubber type, additives, stretching behavior, and service temperature, so evaluate repeated deformation on actual materials.

Main applications and requirements

  • Finishing rubber and elastomer parts
  • Surface protection accommodating bending and stretching
  • Providing soft tactile feel and appearance

Characteristics and mechanisms

01

Ability to accommodate deformation

Consider a design that limits film cracking in response to substrate bending and stretching.

02

Adhesion to elastic substrates

Check substrate type and surface condition, then evaluate adhesion on actual materials.

03

Finishes including tactile feel

For types intended to provide a soft touch, also check performance against dirt and abrasion.

Basic information and general technical explanation

An elongation value differs from bending of an actual part

A test value showing film elongation does not represent every aspect of part shape, bending direction, repetition, and temperature. Also check areas where strain concentrates at corners or changes in thickness.

Rubber additives, surface blooming, and plasticizer migration may affect adhesion or tactile feel. Align cleaning, pretreatment, and reaction-curing conditions, and evaluate changes over time as well.

Checks for selection and introduction

Define the substrate type and deformation conditions, and check its condition after use as well.

Conditions to check when selecting

  • Rubber or resin type, additives, and surface condition
  • Elongation, bend radius, repetition, and temperature
  • Adhesion, tactile feel, abrasion, and chemical-resistance requirements

Support from CoatureVietnam

Please share the flexible substrate type, manner of deformation, and desired tactile feel. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Related trouble prevention and remedies

Process and application relevance08-016

Cracking Arises from Differences in Expansion and Contraction Between the Substrate and Coating Film

Why read this: To examine differences in substrate and coating film expansion and contraction under deformation and temperature changes in service.

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To check the surface condition of flexible substrates and coating film adhesion.

Process and application relevance02-004

A harder coating film is not always better—assessing coating film strength by application

Why read this: To clarify the coating film properties needed for the application rather than judging by hardness alone.

Common consultation questions

Can the same coating be used on every rubber?

Suitability varies with rubber type and formulation. Select after checking adhesion and ability to accommodate deformation on actual materials.

Consultation and inquiries

Please share the flexible substrate type, manner of deformation, and desired tactile feel. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the flexible substrate type, manner of deformation, and desired tactile feel
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-032

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.