Products and solutions

Lubricating coatings for heat resistance, abrasion resistance, and seizure prevention

Paint VoyagerReference ID 1-044Lubricating and non-stick coatings

Related keywords

Lubricating and non-stick coatingsPaint Voyager

Overview / Summary Note

Solid lubrication for contact surfaces exposed to heat and load.

This group of lubricating coatings is intended for heat resistance, abrasion resistance, and prevention of seizure and galling. Select the combination of solid lubricant and binder according to contact-surface temperature, load, and motion. High-temperature systems and abrasion-resistant systems are not treated as having the same heat resistance or friction performance.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these coatings for parts where oil is difficult to use at high temperatures, where seizure occurs during contact, or where repeated wear is a concern.

In addition to temperature and load, identify conditions when motion begins from rest and the roughness of the mating material, and evaluate film consumption during actual operation.

Main applications and requirements

  • Measures against seizure and galling in high-temperature contact areas
  • Contact surfaces such as gaskets
  • Considering abrasion resistance where oil or grease is difficult to use

Characteristics and mechanisms

01

Use solid lubricants

Select the application according to the component design of each system, such as boron nitride or molybdenum disulfide.

02

Match heat and load requirements

Confirm high-temperature resistance and suitability for load and wear for each product.

03

Evaluate coating film consumption as well

Check friction stability and how much coating remains according to the number of operating cycles and contact conditions.

Basic information and general technical explanation

Seizure prevention and low friction are different evaluation criteria

Seizure and galling relate to high loads and temperatures at contact areas and cannot be assessed solely by a reduction in the coefficient of friction. Evaluation must include the mating material, contact pressure, operating speed, and temperature.

Solid lubricating films function through the combination of materials and adhesion to the substrate. Do not extend published temperature values to every type; check film thickness, curing conditions, and the thermal history of the actual equipment.

Checks for selection and introduction

Select a system according to heat, load, and motion conditions, then confirm durability.

Conditions to check when selecting

  • Mating material, contact pressure, and static and moving conditions
  • Continuous and intermittent temperatures, atmosphere, and number of operating cycles
  • Pretreatment, film thickness, curing, dimensions, and repair method

Support from CoatureVietnam

Please share the contacting materials, temperature and load, and the condition of seizure and wear. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related trouble prevention and remedies

Process and application relevance08-016

Cracking Arises from Differences in Expansion and Contraction Between the Substrate and Coating Film

Why read this: To examine differences in expansion and contraction between the substrate and coating film as temperature changes.

Process and application relevance02-009

How to Read Test Data Correctly: Specification Values Alone Cannot Resolve Shop-Floor Problems

Why read this: To clarify differences between service temperature, holding time and environment and the test conditions.

Process and application relevance02-003

Paints That Dry and Paints That Harden by Reaction: The Difference Between Drying and Curing

Why read this: To check the drying and curing conditions needed for coating film formation.

Condition to check: Confirm actual curing conditions in the technical documentation for the product concerned

Common consultation questions

Can a single heat-resistance temperature be applied to every type?

Components and conditions differ by type. Select the product after confirming its heat, load, and wear conditions.

Consultation and inquiries

Please share the contacting materials, temperature and load, and the condition of seizure and wear. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the contacting materials, temperature and load, and the condition of seizure and wear
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-044

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.