Products and solutions

Degreasing agent for light metals

Paint VoyagerReference ID 1-061Cleaning agents

Related keywords

Cleaning agentsPaint Voyager

Overview / Summary Note

Remove contamination without damaging light-metal surfaces.

This degreasing agent is selected for light metals such as aluminum. Check both removal of oils and fine contamination and effects on the substrate. Select according to alloy, surface treatment, and cleaning method rather than directly transferring conditions used for steel.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of material classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this agent when discoloration after cleaning or uneven adhesion on light-metal parts is a concern, or when a substrate change calls for a review of degreasing conditions.

Consider substrate dissolution and etching separately from oil removal, and confirm the required appearance and suitability for the next process.

Main applications and requirements

  • Cleaning light-metal parts before coating
  • Degreasing suited to the alloy and surface treatment
  • Evaluating discoloration, surface roughening, and cleaning effectiveness

Characteristics and mechanisms

01

Account for effects on the substrate

Check effects on the alloy and surface treatment under the specified conditions.

02

A cleaning system suited to the contamination

Identify processing oils, fine particles, and forming residues to select the system.

03

Prepare for conversion treatment and coating

Evaluate suitability including the state after cleaning, rinsing, and subsequent treatment.

Basic information and general technical explanation

Separate cleaning effectiveness from surface changes when cleaning light metals

Surfaces of aluminum and similar materials change depending on agent type, temperature, and time. Conditions that remove oil may also affect substrate appearance or dimensions.

Check alloy differences and whether the material is cast or rolled, and evaluate the cleaned surface on actual materials. Determine conditions including subsequent conversion films and coating adhesion and corrosion resistance.

Checks for selection and introduction

Clarify the alloy and surface condition, and evaluate both after cleaning and after coating.

Conditions to check when selecting

  • Alloy type, manufacturing method, and existing surface treatment
  • Oil type, agent, temperature, concentration, and time
  • Discoloration, surface roughening, rinsing, and downstream-process compatibility

Support from CoatureVietnam

Please share the light-metal material, surface treatment, and oil and cleaning conditions. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Related trouble prevention and remedies

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To check light-metal surface condition and coating film adhesion.

Process and application relevance06-007

Surface Preparation Precautions for Aluminum Coating

Why read this: To check aluminum surface condition and surface preparation conditions.

Condition to check: When the substrate is aluminum

Process and application relevance05-013

Integrating occupational health and safety into coating design—checking SDSs and the working environment

Why read this: To check the SDS and handling conditions for surface preparation chemicals.

Common consultation questions

Can degreasing conditions for steel be used directly?

Effects on the substrate may differ. Check a system and conditions suited to the light metal, and evaluate actual materials.

Consultation and inquiries

Please share the light-metal material, surface treatment, and oil and cleaning conditions. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the light-metal material, surface treatment, and oil and cleaning conditions
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-061

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.