Products and solutions

Dedicated thinner for zinc-dust coatings

Paint VoyagerReference ID 1-070Thinners and solvents

Related keywords

Thinners and solventsPaint Voyager

Overview / Summary Note

Dilute according to the zinc-dust coating's specified conditions.

This dedicated thinner adjusts the viscosity of compatible zinc-dust coatings. Check the required dilution and coating method, and select it as a related material that maintains coating dispersion and film formation. Dilution is not always required for ordinary brush application, and managing the amount so that it does not exceed the specified level is important.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of material classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this thinner when checking viscosity suited to spray application or identifying how to handle a coating whose viscosity has changed during use.

Check film thickness and zinc-dust condition as well as flow, and avoid unconditional substitution with general-purpose thinner.

Main applications and requirements

  • Viscosity adjustment of specified zinc-dust coatings
  • Matching conditions for spray application and other methods
  • Addressing changes in coating viscosity during use

Characteristics and mechanisms

01

Related material for the target coating

Combine with the compatible coating and confirm application to other systems individually.

02

Determine whether dilution is needed

Check whether to dilute according to the application method and coating condition.

03

Avoid reducing film thickness

Manage the dilution amount and do not assess application as suitable solely from ease of flow.

Basic information and general technical explanation

Avoiding excessive dilution is important for zinc-dust coatings

Dilution affects viscosity, drying, and film thickness during application. Excessive dilution may make it difficult to obtain the required coating film, so check the coated surface under the specified conditions.

Coating settling and increased viscosity are different phenomena. First restore a uniform condition by stirring, then determine whether dilution is needed according to the selected product's application specification.

Checks for selection and introduction

Confirm the coating name and application method, and use under the specified dilution conditions.

Conditions to check when selecting

  • Compatible coating and currently specified thinner
  • Application method such as brush or spray
  • Condition after stirring, required dilution amount, and target film thickness

Support from CoatureVietnam

Please share the target coating, application method, and current viscosity condition. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Types and characteristics of solvents

Introduces how solvents dissolve resins and affect viscosity and drying.

General properties of solvents

Introduces solvent selection considerations, including solubility, evaporation rate and surface tension.

Designing solvent composition

Introduces the basics of considering a dedicated thinner through the balance of dissolving power and evaporation.

Related trouble prevention and remedies

Process and application relevance08-005

Investigate blushing and whitening through high humidity and thinner selection

Why read this: To examine blushing through temperature, humidity, surface temperature and thinner drying rate.

Condition to check: When blushing is a concern in solventborne spray coating; confirm compatibility with the paint and method concerned

Process and application relevance08-004

Sagging and Bubbles Arise from Excessive Film Build and Spraying Too Close

Why read this: To check the balance of viscosity, film thickness, gun distance and drying.

Condition to check: When considering sagging and bubbles in spray coating

Process and application relevance08-010

Setting Time Causes Defects When It Is Too Short or Too Long

Why read this: To consider thinner drying behavior together with the time before heating and curing.

Condition to check: When the process includes a flash-off stage

Common consultation questions

Should thinner be added to zinc-dust coatings every time?

Some application methods do not require dilution. First check stirring and coating condition, and adjust under the specified conditions only when needed.

Consultation and inquiries

Please share the target coating, application method, and current viscosity condition. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the target coating, application method, and current viscosity condition
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-070

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.