Products and solutions

Dedicated thinner for epoxy-based zinc-dust coatings

Paint VoyagerReference ID 1-071Thinners and solvents

Related keywords

Thinners and solventsPaint Voyager

Overview / Summary Note

Use the compatible thinner for one-component epoxy-based zinc-dust coatings.

This dedicated thinner is compatible with one-component epoxy-resin-based zinc-rich paint. Select it to maintain the target coating's dissolution, dispersion, and coating conditions. It is important not to treat it as the same material as general zinc-dust coating thinner or thinner for other epoxies.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of material classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this thinner when establishing spray conditions for the compatible coating or checking how to address viscosity changes.

Confirm whether dilution is needed and the specified amount, and manage through to dry film thickness and topcoat compatibility.

Main applications and requirements

  • Viscosity adjustment of one-component epoxy-based zinc-dust coatings
  • Spray application of the specified coating
  • Checking viscosity and drying conditions during application

Characteristics and mechanisms

01

Match the target resin system

Combine with the specified coating and separately confirm application to other materials.

02

Manage the dilution amount

Confirm the required amount according to coating method and coating condition.

03

Check coating film thickness and drying

Evaluate the required corrosion-protective film thickness and drying, as well as appearance after dilution.

Basic information and general technical explanation

Solvent composition differs even when application names are the same

Thinner is a related material formulated to balance resin solubility and evaporation. Similar classification names do not necessarily mean identical dispersion, film formation, or drying.

Check the specified documentation for the coating used, and determine whether dilution is needed after stirring. Confirm film thickness and drying before topcoating, and avoid determining conditions solely by an easy-to-use viscosity.

Checks for selection and introduction

Check the target coating's specification and establish consistent dilution, application, and drying conditions.

Conditions to check when selecting

  • Compatibility between the target coating and specified thinner
  • Application method, whether dilution is needed, and specified amount
  • Stirring, film thickness, drying, and conditions until topcoating

Support from CoatureVietnam

Please share the target coating, thinner currently used, and coating method. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Types and characteristics of solvents

Introduces how solvents dissolve resins and affect viscosity and drying.

General properties of solvents

Introduces solvent selection considerations, including solubility, evaporation rate and surface tension.

Designing solvent composition

Introduces the basics of considering a dedicated thinner through the balance of dissolving power and evaporation.

Related trouble prevention and remedies

Process and application relevance08-005

Investigate blushing and whitening through high humidity and thinner selection

Why read this: To examine blushing through temperature, humidity, surface temperature and thinner drying rate.

Condition to check: When blushing is a concern in solventborne spray coating; confirm compatibility with the paint and method concerned

Process and application relevance08-004

Sagging and Bubbles Arise from Excessive Film Build and Spraying Too Close

Why read this: To check the balance of viscosity, film thickness, gun distance and drying.

Condition to check: When considering sagging and bubbles in spray coating

Process and application relevance08-010

Setting Time Causes Defects When It Is Too Short or Too Long

Why read this: To consider thinner drying behavior together with the time before heating and curing.

Condition to check: When the process includes a flash-off stage

Common consultation questions

Can general zinc-dust coating thinner be substituted?

It is not the same material. Check the thinner specified for the target coating and avoid unconditional substitution.

Consultation and inquiries

Please share the target coating, thinner currently used, and coating method. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the target coating, thinner currently used, and coating method
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-071

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.