Products and solutions

Epoxy resin anticorrosive coatings

Paint VoyagerReference ID 1-005Anticorrosive coatings

Related keywords

Anticorrosive coatingsPaint Voyager

Overview / Summary Note

Protect equipment from the effects of chemicals and water.

A group of epoxy resin anticorrosive coatings emphasizing adhesion and chemical resistance. Select between primers and topcoats, standard and high-build types, and other variants according to the equipment's service environment. A chemical atmosphere and immersion in liquid involve different conditions, so the coating system must be checked for the application.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Candidates when considering measures against chemical splash or corrosion on factory equipment and piping.

Defining concentration, temperature, and contact duration in addition to the chemical name makes the required resistance clearer. For outdoor use, also consider whether a topcoat is needed to maintain appearance.

Main applications and requirements

  • Corrosion protection of equipment and piping in chemical plants
  • Steel components exposed to chemical atmospheres
  • Selecting epoxy coating systems, including primers and topcoats

Characteristics and mechanisms

01

Emphasize adhesion and barrier protection

Combine adhesion to a clean substrate with protection from the environment by the cured coating film.

02

Select according to contact conditions

Treat splash, atmospheric exposure, and continuous immersion as separate conditions and check the appropriate product family.

03

Manage curing and overcoating

Coordinate mixing ratios, temperature, and recoating intervals to establish a process in which each layer functions.

Basic information and general technical explanation

Check chemical resistance for the combination of chemical and service conditions

A typical epoxy coating film forms through reaction between a base component and a curing agent. Inadequate mixing or curing makes the resistance stated in documentation difficult to achieve.

Chemical-resistance test results are conditional information, including chemical concentration, temperature, duration, and film thickness. Do not transfer a specification for indoor, non-immersion use directly to tank interiors or continuous underwater service.

Checks for selection and introduction

Define the chemicals and contact conditions, then cross-check applicable coating specifications.

Conditions to check when selecting

  • Chemical names, concentrations, temperatures, and contact durations
  • Non-immersion, splash, or continuous immersion
  • Surface preparation, mixing ratio, film thickness, and curing period before service

Support from CoatureVietnam

Please share the equipment, chemicals it contacts, temperature, and service conditions. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Characteristics and uses of epoxy resins

Introduces properties related to adhesion and corrosion protection, and applications considered in light of weather resistance.

Why apply paint in multiple layers?

Introduces the roles of primers and topcoats and their combination within the complete coating system.

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Related trouble prevention and remedies

Process and application relevance06-004

Why rust can occur even with rust-preventive coatings

Why read this: To review the substrate, surface preparation, film thickness and service environment as well as the anti-corrosion paint.

Process and application relevance06-003

Reading the Cause from the Pattern of Rust

Why read this: To identify factors requiring investigation from the appearance and location of the rust.

Process and application relevance11-013

Do not judge corrosion-protection coating by initial price alone: Recoating intervals and life-cycle cost

Why read this: To consider corrosion-protection specifications and recoating intervals from a maintenance perspective.

Condition to check: When considering long-term corrosion-protection and maintenance plans

Common consultation questions

Does a chemical-resistant coating withstand every chemical?

Resistance varies with the chemical and conditions. Confirm using documentation and evaluation appropriate to the service conditions, including mixed liquids and chemicals used during cleaning.

Consultation and inquiries

Please share the equipment, chemicals it contacts, temperature, and service conditions. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the equipment, chemicals it contacts, temperature, and service conditions
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-005

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.