Products and solutions

Modified epoxy resin anticorrosive coatings

Paint VoyagerReference ID 1-004Anticorrosive coatings

Related keywords

Anticorrosive coatingsPaint Voyager

Overview / Summary Note

Build corrosion protection around the conditions of repainting.

A group of modified epoxy resin coatings used for corrosion protection and repainting of structures. Select according to location and process from types suited to existing coatings, types allowing convenient recoating intervals, and types for water-contact applications or low-temperature application.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Potential candidates when repairing corrosion on existing equipment or considering repainting while retaining part of an existing coating.

Project duration, temperature during application, and waiting time before overcoating differ. Do not determine the specification solely from the classification “modified epoxy”; check the product family suited to the site conditions.

Main applications and requirements

  • Anticorrosive repair of bridges, steel frames, and industrial plants
  • Repainting according to the condition of the existing coating
  • Selecting primers, including for water contact and low-temperature application

Characteristics and mechanisms

01

Select from refurbishment conditions

Consider a product family suited to the existing coating, extent of surface preparation, and application method.

02

Select curing suited to the process

Check drying and curing conditions separately for general application, low-temperature application, and other uses.

03

Protect through the coating build-up

Coordinate corrosion protection and finishing roles through the combination with intermediate coats and topcoats.

Basic information and general technical explanation

What to check when retaining an existing coating

Even if an existing coating appears to remain in place, it may have weak adhesion, a chalked surface, or susceptibility to solvent attack. Defining the area to retain requires cleaning, abrasion, and confirmation through a trial application.

Epoxy curing is affected by temperature. A touchable condition differs from sufficient curing, so the timing of overcoating or beginning water contact must follow the specification of the selected product.

Checks for selection and introduction

First define the areas to repair and the surface preparation that can be performed.

Conditions to check when selecting

  • Existing coating type, adhesion condition, and area to retain
  • Contact with water or chemicals and temperature during application
  • Recoating interval, application method, and topcoat compatibility

Support from CoatureVietnam

Please share the repair areas, condition of the existing coating, and site application conditions. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Characteristics and uses of epoxy resins

Introduces properties related to adhesion and corrosion protection, and applications considered in light of weather resistance.

Why apply paint in multiple layers?

Introduces the roles of primers and topcoats and their combination within the complete coating system.

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Related trouble prevention and remedies

Process and application relevance06-004

Why rust can occur even with rust-preventive coatings

Why read this: To review the substrate, surface preparation, film thickness and service environment as well as the anti-corrosion paint.

Process and application relevance06-003

Reading the Cause from the Pattern of Rust

Why read this: To identify factors requiring investigation from the appearance and location of the rust.

Process and application relevance11-013

Do not judge corrosion-protection coating by initial price alone: Recoating intervals and life-cycle cost

Why read this: To consider corrosion-protection specifications and recoating intervals from a maintenance perspective.

Condition to check: When considering long-term corrosion-protection and maintenance plans

Common consultation questions

Can it be applied directly over the existing coating?

Check the soundness and compatibility of the existing coating. Address lifting, chalking, and contamination, then decide through a trial application under the specified conditions.

Consultation and inquiries

Please share the repair areas, condition of the existing coating, and site application conditions. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the repair areas, condition of the existing coating, and site application conditions
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-004

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.