Products and solutions

Epoxy resin powder coatings

Paint VoyagerReference ID 1-013Powder coatings

Related keywords

Powder coatingsPaint Voyager

Overview / Summary Note

Consider powder coating for indoor corrosion protection.

Epoxy resin powder coatings considered primarily for indoor and anticorrosive applications. Select standard, low-temperature-curing, heavy-duty anticorrosive, and other product families according to performance requirements and the baking process. Even solvent-free powder application requires surface preparation and sufficient curing.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these when emphasizing adhesion and corrosion resistance on indoor metal parts, or ensuring corrosion protection while reviewing baking conditions.

If outdoor exposure is involved, compare other resin systems or topcoat combinations, including appearance changes caused by light.

Main applications and requirements

  • Powder coating of indoor metal parts
  • Designing coating films for components requiring corrosion protection
  • Checking compatibility of low-temperature-curing types with existing ovens

Characteristics and mechanisms

01

Use epoxy adhesion and corrosion protection

Form a cured film on a clean metal surface and consider indoor protective applications.

02

Select by differences in curing temperature

Distinguish standard and low-temperature-curing types and match them to the heating behavior of actual components.

03

Distinguish indoor and outdoor conditions

Evaluate weather resistance separately when outdoor color and gloss retention are priorities.

Basic information and general technical explanation

Check powder-coating cure by component temperature

Powder melts and flows when heated, then reacts to form a coating film. Even if the oven reaches its set temperature, thick components or areas with high thermal mass may not meet the required curing conditions.

When selecting a low-temperature-curing product, also measure substrate temperature and holding time, and check adhesion, corrosion resistance, and appearance. Resin classification alone cannot guarantee an individual product's chemical resistance or suitability for outdoor use.

Checks for selection and introduction

Select the appropriate product family from the required corrosion protection and the baking conditions of actual components.

Conditions to check when selecting

  • Indoor or outdoor use, contact with chemicals or water, and required corrosion resistance
  • Substrate, pretreatment, film thickness, and adhesion in complex shapes
  • Component temperature history and the selected product's curing conditions

Support from CoatureVietnam

Please share the parts, service environment, pretreatment, and current baking conditions. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Epoxy powder coatings

Introduces characteristics for corrosion-protection and chemical-resistant applications and considerations for outdoor use.

Types of powder coatings

Introduces thermosetting and thermoplastic systems and coating film formation through heating.

Related trouble prevention and remedies

Process and application relevance08-012

Moisture and oil cause particle defects and blockages in powder coating

Why read this: To review moisture and oil in the powder, compressed air and storage environment when identifying causes of particles and blockages.

Process and application relevance07-015

Baking Ovens, Cooling, and Reclaimed-Powder Control in Powder Coating

Why read this: To check baking, cooling and the handling of recovered powder against the selected process.

Condition to check: Recovered-powder management applies when a recovery process is used

Process and application relevance02-009

How to Read Test Data Correctly: Specification Values Alone Cannot Resolve Shop-Floor Problems

Why read this: To examine test data and evaluation conditions for the required appearance and functionality.

Common consultation questions

Can a low-temperature-curing product be used just by lowering the oven temperature?

Check component temperature and holding time. After changing settings, evaluate appearance, curing, adhesion, and other properties before establishing the process.

Consultation and inquiries

Please share the parts, service environment, pretreatment, and current baking conditions. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the parts, service environment, pretreatment, and current baking conditions
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-013

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.