Products and solutions

Epoxy–polyester powder coatings

Paint VoyagerReference ID 1-014Powder coatings

Related keywords

Powder coatingsPaint Voyager

Overview / Summary Note

Coordinate appearance and formability of indoor parts with powder coatings.

Powder coatings combining epoxy and polyester, primarily for indoor use. Consider the balance of appearance, mechanical properties, and application workability, then select standard, matt, low-temperature-curing, and other types according to the finish and process.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these when combining visual appeal with useful coating-film properties on metal parts of steel furniture or equipment.

Even for the same color, changes in gloss or baking conditions alter visual impression and physical properties, so check using actual parts and processes.

Main applications and requirements

  • Metal parts such as steel furniture and indoor equipment
  • Selecting powder finishes, including matt finishes
  • Reviewing processes using low-temperature-curing types

Characteristics and mechanisms

01

Balance the two resins

A product family that uses a resin combination to balance appearance and coating-film properties.

02

Select gloss and curing conditions

Check standard, matt, and low-temperature-curing products as separate types.

03

Evaluate primarily for indoor applications

Check required weather resistance separately for outdoor locations or areas with strong sunlight.

Basic information and general technical explanation

Check the resin combination in hybrid systems

The term “hybrid” describes a family combining multiple resins. This category covers epoxy–polyester systems, distinguished from standalone epoxy systems and outdoor polyester systems.

Powder flow and gloss are affected by film thickness and baking conditions. Evaluate adhesion, cracking during fabrication, and contamination and wear in service on actual components, rather than relying only on a sample panel's appearance.

Checks for selection and introduction

Define the target appearance and indoor service conditions, then evaluate in the actual baking process.

Conditions to check when selecting

  • Approval criteria for gloss, smoothness, and color
  • Part shape, pretreatment, and film thickness
  • Component temperature, curing conditions, and fabrication or abrasion requirements

Support from CoatureVietnam

Please share the part application, desired gloss and appearance, and baking conditions. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Epoxy-polyester powder coatings

Introduces the characteristics of hybrid systems combining the two resins.

Types of powder coatings

Introduces thermosetting and thermoplastic systems and coating film formation through heating.

Related trouble prevention and remedies

Process and application relevance08-012

Moisture and oil cause particle defects and blockages in powder coating

Why read this: To review moisture and oil in the powder, compressed air and storage environment when identifying causes of particles and blockages.

Process and application relevance07-015

Baking Ovens, Cooling, and Reclaimed-Powder Control in Powder Coating

Why read this: To check baking, cooling and the handling of recovered powder against the selected process.

Condition to check: Recovered-powder management applies when a recovery process is used

Process and application relevance02-009

How to Read Test Data Correctly: Specification Values Alone Cannot Resolve Shop-Floor Problems

Why read this: To examine test data and evaluation conditions for the required appearance and functionality.

Common consultation questions

Can these be used in the same way as outdoor polyester coatings?

They are not the same classification. For outdoor use, check the relevant product's weather resistance and application suitability.

Consultation and inquiries

Please share the part application, desired gloss and appearance, and baking conditions. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the part application, desired gloss and appearance, and baking conditions
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-014

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.