Products and solutions

Industrial waterborne polyurethane and epoxy coatings

Paint VoyagerReference ID 1-021Waterborne and environmentally considerate coatings

Related keywords

Waterborne and environmentally considerate coatingsPaint Voyager

Overview / Summary Note

Select waterborne primers and topcoats by their roles.

This category groups industrial waterborne polyurethane topcoats and waterborne epoxy primers. Consider topcoats primarily for finish appearance and primers for substrate adhesion and compatibility with subsequent coatings. Their applications and application conditions differ even though both are waterborne.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these when reviewing machine or metal-product coatings for a move to waterborne systems, or seeking a waterborne primer suited to the substrate.

For zinc-coated steel sheet, aluminum, and similar substrates, check surface condition and coating type. Do not replace products simply because both are waterborne.

Main applications and requirements

  • Waterborne topcoats for industrial metal products
  • Waterborne primers emphasizing substrate adhesion
  • Considering a move to waterborne primers, topcoats, and drying processes

Characteristics and mechanisms

01

Establish appearance with the topcoat

Waterborne polyurethane systems are a family considered for gloss, distinctness of image, and industrial finishes.

02

Connect with the substrate through the primer

For waterborne epoxy systems, check combinations with the relevant substrates and various topcoats.

03

Match the drying environment

Establish the process including humidity, ventilation, and protection from rain and condensation.

Basic information and general technical explanation

Waterborne topcoats and primers are not interchangeable

Moving to waterborne systems requires consideration of water evaporation, film formation, and substrate wetting. Surfaces with residual oil or condensation can cause defects, so check pretreatment and the application environment.

Conditions for the zinc-coated steel sheet supported by the product are not necessarily the same as for hot-dip galvanized steel. Also, do not uniformly transfer specifications for appearance-focused topcoats to underwater applications or locations with continuous condensation.

Checks for selection and introduction

Distinguish the roles of primer and topcoat, then select from the substrate and drying conditions.

Conditions to check when selecting

  • Substrate and metallic-coating type, and surface condition
  • Primer/topcoat combination and service environment
  • Temperature, humidity, ventilation, and recoating and curing conditions

Support from CoatureVietnam

Please share the metal substrate, current coating system, and processes to change to waterborne. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Characteristics of water as a solvent

Introduces water's evaporation and wetting properties and the differences to consider in waterborne coating.

Why apply paint in multiple layers?

Introduces the roles of primers and topcoats and their combination within the complete coating system.

Related trouble prevention and remedies

Process and application relevance07-016

Why Is Drying Control Difficult in Waterborne Coating?

Why read this: To check temperature, humidity, airflow and film thickness affecting the drying of waterborne coatings.

Condition to check: When adopting a waterborne type

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To review substrate surface condition and preparation when identifying factors affecting adhesion.

Reference for selection and evaluation02-008

Waterborne, Powder, or Solvent-Borne: What to Consider Before Choosing an Environmentally Responsive Paint

Why read this: To compare waterborne, powder and solventborne options against actual process conditions.

Condition to check: Common reference material for comparing options

Common consultation questions

Can a waterborne coating be applied directly to any metal?

Check the relevant substrate and pretreatment. The classification “waterborne” alone cannot determine substrate adhesion or suitability for continuously wet areas.

Consultation and inquiries

Please share the metal substrate, current coating system, and processes to change to waterborne. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the metal substrate, current coating system, and processes to change to waterborne
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-021

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.