Establish appearance with the topcoat
Waterborne polyurethane systems are a family considered for gloss, distinctness of image, and industrial finishes.
Related keywords
Select waterborne primers and topcoats by their roles.
This category groups industrial waterborne polyurethane topcoats and waterborne epoxy primers. Consider topcoats primarily for finish appearance and primers for substrate adhesion and compatibility with subsequent coatings. Their applications and application conditions differ even though both are waterborne.
Consider these when reviewing machine or metal-product coatings for a move to waterborne systems, or seeking a waterborne primer suited to the substrate.
For zinc-coated steel sheet, aluminum, and similar substrates, check surface condition and coating type. Do not replace products simply because both are waterborne.
Waterborne polyurethane systems are a family considered for gloss, distinctness of image, and industrial finishes.
For waterborne epoxy systems, check combinations with the relevant substrates and various topcoats.
Establish the process including humidity, ventilation, and protection from rain and condensation.
Moving to waterborne systems requires consideration of water evaporation, film formation, and substrate wetting. Surfaces with residual oil or condensation can cause defects, so check pretreatment and the application environment.
Conditions for the zinc-coated steel sheet supported by the product are not necessarily the same as for hot-dip galvanized steel. Also, do not uniformly transfer specifications for appearance-focused topcoats to underwater applications or locations with continuous condensation.
Distinguish the roles of primer and topcoat, then select from the substrate and drying conditions.
Please share the metal substrate, current coating system, and processes to change to waterborne. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.
Introduces water's evaporation and wetting properties and the differences to consider in waterborne coating.
Introduces the roles of primers and topcoats and their combination within the complete coating system.
Why read this: To check temperature, humidity, airflow and film thickness affecting the drying of waterborne coatings.
Condition to check: When adopting a waterborne type
Why read this: To review substrate surface condition and preparation when identifying factors affecting adhesion.
Why read this: To compare waterborne, powder and solventborne options against actual process conditions.
Condition to check: Common reference material for comparing options
Check the relevant substrate and pretreatment. The classification “waterborne” alone cannot determine substrate adhesion or suitability for continuously wet areas.
Please share the metal substrate, current coating system, and processes to change to waterborne. You are welcome to consult us using whatever information is currently available.
When contacting us, please quote Reference ID: 1-021
Copy the text below, add your on-site situation and send it to us via the Contact page.
You can summarize the situation on site and what you want to confirm even before choosing a product.
A: This service is designed to propose high-value-added Japanese paints to customers and efficiently deliver them to your doorstep.
A: Paint Voyager is a service that suggests high-value-added Japanese paints and enables efficient procurement even in small quantities.
A: We leverage our trusted relationships with Japanese paint manufacturers to efficiently source a wide range of paint products from Japan.
A: Yes, we offer a range of support beyond paints, providing various materials to help you achieve your coating requirements.
A: We have a fully-equipped hazardous material warehouse and comply with fire prevention regulations to safely store and supply hazardous materials, providing support for safe handling and procurement.