Products and solutions

Acrylic resin coatings for plastics

Paint VoyagerReference ID 1-026Coatings for plastics

Related keywords

Coatings for plasticsPaint Voyager

Overview / Summary Note

Select acrylic coatings from differences in molded materials.

A group of one-component acrylic resin coatings used for appearance and protection of molded plastic products. Select product families targeting different resins according to material and surface condition. For finishes on home appliances and similar products, check adhesion, drying, and abrasion performance on the actual molded material.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these when coordinating color and gloss on plastic exteriors or reviewing the balance between drying and adhesion.

Do not treat ABS, styrenic materials, and difficult-to-coat resins under the same conditions. Define molding grade, release agents, and stress condition as well.

Main applications and requirements

  • Finishing home-appliance and industrial plastic parts
  • Selecting acrylic coatings suited to molded materials
  • Stabilizing drying, adhesion, and appearance

Characteristics and mechanisms

01

Consider a one-component process

Distinguish these from two-component types using a mixed-in curing agent, and check drying and film-formation conditions.

02

Select by resin type

Separate product families for different target resins and check suitability for the actual material even with the same color.

03

Check solvent–substrate compatibility

Evaluate effects on the substrate and the finish using the specified thinning system and application conditions.

Basic information and general technical explanation

The plastic material name alone does not determine adhesion

Molded products respond differently to coating according to resin grade, additives, release agents, and residual stress. Check solvent-induced swelling and cracking and surface contamination as well.

Overly rapid solvent evaporation may affect surface texture or whitening, while overly slow evaporation may affect drying waits or handling scratches. Follow the specified thinning conditions and evaluate adhesion and appearance on actual materials.

Checks for selection and introduction

Check molded material and surface condition, and select the type under consistent drying conditions.

Conditions to check when selecting

  • Resin name and grade, release agents, and cleaning method
  • Solvent effects on the substrate and allowable heating temperature
  • Film thickness, drying, and adhesion, abrasion, and appearance requirements

Support from CoatureVietnam

Please share the resin type, molding and cleaning conditions, and desired finish. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Characteristics and uses of acrylic resins

Introduces resin design and the selection of lacquer, baking and two-component systems.

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Related trouble prevention and remedies

Process and application relevance06-009

Plastic Coating Starts with Identifying the Material

Why read this: To check resin type and grade and consider compatibility with paints and solvents.

Process and application relevance06-010

Mold Release Agents, Plasticizers, and Solvent Cracking

Why read this: To check the effects of mold-release agents, plasticizers and solvents.

Process and application relevance06-012

Why does cracking occur in plastic coatings?

Why read this: To investigate cracking through the relationships between the substrate, coating film, solvents and stresses.

Common consultation questions

Can a coating that worked on ABS also be used on another resin?

Check suitability for each resin. Even with the same coating, adhesion and effects on the substrate vary with material, grade, and molding condition.

Consultation and inquiries

Please share the resin type, molding and cleaning conditions, and desired finish. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the resin type, molding and cleaning conditions, and desired finish
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-026

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.