Products and solutions

Two-component acrylic urethane coatings for plastics

Paint VoyagerReference ID 1-027Coatings for plastics

Related keywords

Coatings for plasticsPaint Voyager

Overview / Summary Note

Build resistance into plastic-part finishes through two-component curing.

A group of two-component reaction-curing acrylic urethane coatings for plastics. Consider chemical resistance, solvent resistance, and resistance to impact and outdoor light according to the substrate and application. Distinguish general-purpose, engineering-plastic, low-temperature-curing, and other types when selecting.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these when improving resistance to cleaning chemicals, hand contact, and contact during service on plastic parts.

Even when low-temperature curing is desired, check the required cure and handling time in mass production as well as the substrate's heat limit.

Main applications and requirements

  • Plastic parts for home appliances, optical equipment, and industrial equipment
  • Evaluation against requirements for automotive interiors and similar applications
  • Considering compatibility of substrates and low-temperature-curing processes

Characteristics and mechanisms

01

React the base component with the curing agent

Form a film suited to the application through the combination of acrylic resin and the specified curing agent.

02

Select a substrate-appropriate product family

Check the type and thinning system suited to the target resin, including polycarbonate and other materials.

03

Coordinate curing temperature and resistance

Evaluate appearance and required resistance under the selected product's curing conditions, including for low-temperature types.

Basic information and general technical explanation

Check two-component performance through mixing and curing

Deviation from the specified mixing ratio or inadequate curing affects adhesion, chemical resistance, and abrasion performance. The reaction after mixing varies with temperature, so manage the quantity mixed and pot life during mass production.

Test values are information obtained under conditions including a particular substrate, color, film thickness, and conditioning period. Evaluate suitability on actual molded materials, including stress cracking or deformation of plastic parts.

Checks for selection and introduction

Select the type under consistent substrate, service-contact, and curing-process conditions.

Conditions to check when selecting

  • Resin grade, release agents, and effects of solvents
  • Specified curing agent, mixing ratio, temperature, and pot life
  • Curing and conditioning conditions, and chemical, abrasion, and weather-resistance requirements

Support from CoatureVietnam

Please share the molded material, required resistance, and current curing process. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Characteristics and uses of polyurethane resins

Explains how urethane bonds form a coating film and how hardness relates to flexibility.

Mixing two-component paints and pot life

Introduces base-to-hardener ratios, the reaction after mixing and the time during which mixed paint remains usable.

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Related trouble prevention and remedies

Process and application relevance06-009

Plastic Coating Starts with Identifying the Material

Why read this: To check resin type and grade and consider compatibility with paints and solvents.

Process and application relevance06-010

Mold Release Agents, Plasticizers, and Solvent Cracking

Why read this: To check the effects of mold-release agents, plasticizers and solvents.

Process and application relevance06-012

Why does cracking occur in plastic coatings?

Why read this: To investigate cracking through the relationships between the substrate, coating film, solvents and stresses.

Common consultation questions

Can a low-temperature type be used with the same mixing ratio as a standard type?

Each type must be checked. Cross-check curing agent, mixing ratio, thinning, and curing and conditioning conditions against the selected product's documentation.

Consultation and inquiries

Please share the molded material, required resistance, and current curing process. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the molded material, required resistance, and current curing process
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-027

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.