Products and solutions

Zirconium-based conversion treatment agent

Paint VoyagerReference ID 1-057Pretreatment agents

Related keywords

Pretreatment agentsPaint Voyager

Overview / Summary Note

Review pretreatment burdens with a zirconium-based system.

This conversion treatment agent uses zirconium as its main component. It forms an amorphous film on metal surfaces and is considered as a pretreatment alternative to phosphates. Confirm the scope of the phosphorus-free designation and suitability for the substrate and topcoat across the entire pretreatment line.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of material classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this agent when reviewing sludge, wastewater, and operating burdens from phosphate treatment.

Replacement under the same treatment conditions as existing equipment is not always possible, so identify the process from degreasing, rinsing, treatment tanks, and drying through to coating.

Main applications and requirements

  • Conversion treatment before metal coating
  • Comparing a change from phosphate treatment
  • Reviewing pretreatment operation including wastewater and sludge

Characteristics and mechanisms

01

Zirconium-based conversion film

Evaluate conversion-film formation on the target metal surface under the specified conditions.

02

Consider a phosphate alternative

Check phosphorus handling and operating burdens, and compare performance on the completed coating film.

03

Confirm suitability across the entire process

Match conditions including upstream cleaning, water quality, and downstream coating.

Basic information and general technical explanation

Separate ingredient-free claims from conditions across the entire process

Phosphorus-free and fluorine-free do not mean the same thing. Check the required ingredient conditions in the specific product documentation and avoid extending the designation to other agents or the entire process.

Thin conversion films are affected by the state of degreasing, substrate, rinsing, and treatment-bath management. Compare not only film formation but also adhesion and corrosion resistance after application of the selected coating.

Checks for selection and introduction

Identify the purpose of the change and evaluate both the treatment line and completed coating film.

Conditions to check when selecting

  • Substrate composition and current degreasing, rinsing, and conversion-treatment processes
  • Treatment-bath and water-quality management and conditions for the relevant ingredients
  • Topcoat compatibility, adhesion and corrosion resistance, wastewater, and sludge

Support from CoatureVietnam

Please share the substrate, current pretreatment, and wastewater and sludge issues. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Related trouble prevention and remedies

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To examine the relationships between oil, dirt, surface preparation, wettability and coating film adhesion.

Process and application relevance08-003

Investigate cratering, particle defects, and dirt contamination through the environment and surface preparation as well as the coating material

Why read this: To investigate cratering and foreign matter through substrate surface condition, preparation and environment as well as the paint.

Process and application relevance05-013

Integrating occupational health and safety into coating design—checking SDSs and the working environment

Why read this: To check the chemical SDS and conditions for handling, ventilation and protective equipment.

Common consultation questions

Does phosphorus-free also mean no fluorine is present?

These are separate matters to confirm. Check the ingredient conditions of the specific product and the definitions in its documentation individually.

Consultation and inquiries

Please share the substrate, current pretreatment, and wastewater and sludge issues. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the substrate, current pretreatment, and wastewater and sludge issues
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-057

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.