Products and solutions

One-component epoxy-resin-based zinc-rich paint

Paint VoyagerReference ID 1-069Zinc-dust coatings

Related keywords

Zinc-dust coatingsPaint Voyager

Overview / Summary Note

Consider zinc-dust rust prevention with a one-component epoxy system.

This one-component zinc-rich paint uses a special epoxy resin. Consider steel protection by zinc dust and combination with suitable topcoats. Avoid confusing it with ordinary two-component epoxy, and check the specified thinner, drying, and recoating conditions.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this paint when selecting a one-component rust-preventive material for steel or galvanizing repairs, or identifying compatibility with finish coating.

Determine the coating system after checking the effects of topcoat solvents and the required surface preparation and film thickness.

Main applications and requirements

  • Zinc-dust repairs to steel and galvanized areas
  • Selecting one-component rust-preventive coatings
  • Considering compatible topcoats and recoating

Characteristics and mechanisms

01

One-component epoxy system

Distinguish handling from two-component mixed types and check under the specific product's drying conditions.

02

Corrosion protection with zinc dust

Consider a specification that secures contact with clean steel and the required film thickness.

03

Check compatibility with the topcoat

For compatibility with mild-solvent systems and other types, check the specified products and coating intervals.

Basic information and general technical explanation

Epoxy classification alone does not determine the number of components

Epoxy systems have different film-formation methods. This category covers one-component products and is not managed with the same formulation procedures as ordinary systems that mix a base component and curing agent.

Topcoat solvents may affect the underlying layer, so check the compatible finish, drying, and coating intervals. Evaluate zinc-dust corrosion protection under conditions including treatment of rust and old coating films and the coating film thickness.

Checks for selection and introduction

Confirm one-component handling and topcoat compatibility, and evaluate the specified coating system.

Conditions to check when selecting

  • Condition of steel and galvanizing and removal of rust and oil
  • Specified thinner, stirring, film thickness, and drying
  • Topcoat resin and solvent and recoating conditions

Support from CoatureVietnam

Please share the repair substrate, application conditions, and planned topcoat. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Why apply paint in multiple layers?

Introduces the roles of primers and topcoats and their combination within the complete coating system.

Related trouble prevention and remedies

Process and application relevance06-004

Why rust can occur even with rust-preventive coatings

Why read this: To review the substrate, surface preparation, film thickness and service environment as well as the anti-corrosion paint.

Process and application relevance06-003

Reading the Cause from the Pattern of Rust

Why read this: To identify factors requiring investigation from the appearance and location of the rust.

Process and application relevance11-013

Do not judge corrosion-protection coating by initial price alone: Recoating intervals and life-cycle cost

Why read this: To consider corrosion-protection specifications and recoating intervals from a maintenance perspective.

Condition to check: When considering long-term corrosion-protection and maintenance plans

Common consultation questions

Does being epoxy mean a curing agent must be mixed in?

This category is one-component. Do not add a curing agent for another epoxy; check the specific product's designated procedure.

Consultation and inquiries

Please share the repair substrate, application conditions, and planned topcoat. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the repair substrate, application conditions, and planned topcoat
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-069

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.