Products and solutions

Sensors for process and equipment conditions

Coat VisionerReference ID 6-004Sensors and measurement

Related keywords

Sensors and measurementCoat Visioner

Overview / Summary Note

Select sensors according to the process condition you want to understand.

This group of sensors measures temperature, humidity, pressure, flow rate, vibration, water level, pH, and other variables. Decide what judgments are needed for the process or equipment, then select according to measurement range, installation location, response, and environmental suitability. Confirm collection, display, and notification configurations separately from the sensors.

COLLECT / VISUALIZE / REVIEW
Illustrative concept diagram · Illustration of recording and visualization (graphs are examples)
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these sensors when process-condition variation is not visible or when you want to record inspection values to review defects or equipment changes.

Focus the measurement target and determine the required range and accuracy. Treat ambient-environment values separately from values of the component or treatment solution itself.

Main applications and requirements

  • Temperature and humidity measurement in coating environments
  • Monitoring equipment pressure, flow rate, and vibration
  • Recording tank conditions such as water level and pH

Characteristics and mechanisms

01

Select measurement items according to purpose

Clarify whether the value is used for a quality, inspection, or operating decision.

02

Emphasize installation location

Check the location represented by the measured value and the position that captures changes in the target.

03

Consider ongoing maintenance as well

Select including calibration, cleaning, replacement, wetted-contact conditions, and environmental-resistance conditions.

Basic information and general technical explanation

A measured value is information that includes its target and installation conditions

Oven-air temperature and component temperature, or room humidity and surface condition immediately before coating, are different information. Confirm the quantity directly measured by the sensor.

A broad range and meeting the required accuracy are separate matters. Check response time, mounting, calibration, and changes over time, and manage the system so that changes in measured values can be distinguished from changes in the process.

Checks for selection and introduction

Identify the condition to be judged and establish consistent measurement, installation, and maintenance conditions.

Conditions to check when selecting

  • Target, measurement range, required accuracy, and response time
  • Installation location and environmental conditions such as liquid contact, temperature, and dust
  • Output signals, calibration, cleaning, replacement, and recording configuration

Support from CoatureVietnam

Please share the process condition of interest, measurement location, and required range and accuracy. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related trouble prevention and remedies

Process and application relevance09-005

Inspect equipment to protect quality, not merely to make repairs

Why read this: To organize measurements, inspections and abnormal-condition histories as records that can support improvement.

Process and application relevance08-023

On-Site Interview Checklist for Coating Process Problems

Why read this: To clarify the timing, conditions and recent changes associated with defects and the data to check.

Reference for shared operating considerations02-010

Inspection Does More Than Find Defects: Connecting Inspection to Quality Assurance

Why read this: To examine how recorded information can be fed back into the process and support quality assurance.

Condition to check: This is guidance on applying information, not evidence that the listed system has an inspection function

Common consultation questions

Does a highly accurate sensor allow correct assessment of process conditions?

The correspondence between measurement location and target is also important. Check installation, calibration, and recording conditions along with sensor specifications.

Consultation and inquiries

Please share the process condition of interest, measurement location, and required range and accuracy. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the process condition of interest, measurement location, and required range and accuracy
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 6-004

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.