Products and solutions

Camera reading of meters and indicator lamps

Coat VisionerReference ID 6-005Monitoring and visualization

Related keywords

Monitoring and visualizationCoat Visioner

Overview / Summary Note

Use existing instruments and indicator lamps for inspection records.

This category considers reading meters, digital displays, indicator lamps, and similar items with a camera. When acquiring information while retaining existing displays, evaluate reading for each target. Check the correspondence between instrument displays and actual equipment states and imaging conditions such as reflections, field of view, and contamination.

COLLECT / VISUALIZE / REVIEW
Illustrative concept diagram · Illustration of recording and visualization (graphs are examples)
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this method when making site rounds to check needles or indicator lamps, or when recording values from distant instruments.

Distinguish reading numerical values from detecting illumination, and determine who will check when misrecognition occurs or images cannot be obtained.

Main applications and requirements

  • Recording existing meters for pressure, flow rate, and other values
  • Reading digital displays and counters
  • Checking indicator-lamp and signal-tower states

Characteristics and mechanisms

01

Use existing displays

Consider the application method in comparison with direct signal acquisition.

02

Define readings for each target

Map scales, digits, units, colors, and illumination meanings.

03

Check accuracy in the actual environment

Evaluate stable reading including lighting changes and contamination during operation.

Basic information and general technical explanation

Display-reading accuracy and instrument accuracy are separate

Even if the camera reads the display correctly, the validity of the measured value cannot be assessed if the original instrument is not calibrated. Check image reading separately from instrument management.

Illumination colors and flashing have different meanings depending on the equipment. Check acquisition intervals relative to flashing cycles, missing data, and obstructions, and record display states mapped to equipment operating states.

Checks for selection and introduction

Identify target-display appearance and meaning, and compare with signal-acquisition methods as well.

Conditions to check when selecting

  • Instrument type, scales, digits, units, and meaning of display states
  • Lighting, reflections, field of view, obstructions, flashing, and acquisition intervals
  • Instrument calibration, reading errors, missing data, and inspection operation

Support from CoatureVietnam

Please share photographs of instruments or indicator lamps, display meanings, and the inspection-round method. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related trouble prevention and remedies

Process and application relevance09-005

Inspect equipment to protect quality, not merely to make repairs

Why read this: To organize measurements, inspections and abnormal-condition histories as records that can support improvement.

Process and application relevance08-023

On-Site Interview Checklist for Coating Process Problems

Why read this: To clarify the timing, conditions and recent changes associated with defects and the data to check.

Reference for shared operating considerations02-010

Inspection Does More Than Find Defects: Connecting Inspection to Quality Assurance

Why read this: To examine how recorded information can be fed back into the process and support quality assurance.

Condition to check: This is guidance on applying information, not evidence that the listed system has an inspection function

Common consultation questions

Can equipment abnormalities be judged from indicator-lamp color alone?

The display rules for each equipment item must be confirmed. Define how illumination and flashing correspond to states, and prepare a confirmation method for missing data as well.

Consultation and inquiries

Please share photographs of instruments or indicator lamps, display meanings, and the inspection-round method. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: photographs of instruments or indicator lamps, display meanings, and the inspection-round method
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 6-005

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.