Products and solutions

Baking coatings for metal building materials

Paint VoyagerReference ID 1-019Baking coatings

Related keywords

Baking coatingsPaint Voyager

Overview / Summary Note

Match building-material appearance and processes to each resin system.

A group of polyurethane and acrylic baking coatings for metal building materials. Select between standard, low-temperature-baking, and other variants according to weather-resistance and finish requirements and line conditions. For components such as curtain walls, consistency from substrate pretreatment through baking is important.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these when selecting a finish for metal exteriors or balancing an existing baking process with the target appearance.

Even at the same oven setting, heating behavior varies with component thickness and thermal mass. Check actual shapes and materials as well as flat samples.

Main applications and requirements

  • Metal building materials such as curtain walls
  • Selecting polyurethane and acrylic baking coatings
  • Considering suitability for existing lines, including low-temperature baking

Characteristics and mechanisms

01

Select from resin system and application

Distinguish polyurethane and acrylic systems and match them to the desired appearance and service environment.

02

Combine pretreatment and the coating film

Check substrate-appropriate pretreatment and the primer/topcoat build-up.

03

Evaluate under actual baking conditions

For low-temperature types as well, check appearance and physical properties under consistent component temperature, time, and film-thickness conditions.

Basic information and general technical explanation

Coordinate metal building-material finishes through component temperature

In baked coating, oven air temperature and component surface temperature are not necessarily the same. Check temperature histories for large components, thick sections, areas near fixtures, and other locations, and establish a process that meets the required curing conditions.

Film thickness and primer build-up also depend on color and substrate. Low-temperature baking does not uniformly indicate heat resistance in service or energy-saving benefits; compare using actual oven operation.

Checks for selection and introduction

Align substrate, appearance, and baking-process conditions and check suitability for each selected product.

Conditions to check when selecting

  • Building-material composition, pretreatment, and service environment
  • Polyurethane or acrylic classification and film structure
  • Component temperature, holding time, and evaluation of appearance and adhesion

Support from CoatureVietnam

Please share the building-material composition and shape, target appearance, and baking process. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Planning and preparing coating work

Introduces an approach that considers materials, coating specifications and process management together.

Why apply paint in multiple layers?

Introduces the roles of primers and topcoats and their combination within the complete coating system.

Related trouble prevention and remedies

Process and application relevance08-009

In Bake Drying, Check Workpiece Temperature Rather Than Oven Temperature Alone

Why read this: To check workpiece temperature and holding time, as well as the oven temperature setting.

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To investigate poor adhesion by separating substrate and surface preparation factors from curing conditions.

Process and application relevance05-011

Consider Gloss Defects Through the Underlying Surface, Film Thickness, and Drying Conditions as Well as Paint

Why read this: To examine gloss and finish in relation to film thickness, the underlying surface and drying conditions.

Common consultation questions

Will switching to a low-temperature type save energy?

It depends on oven operating conditions. First ensure component curing, then compare settings, line speed, heating input, and other factors.

Consultation and inquiries

Please share the building-material composition and shape, target appearance, and baking process. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the building-material composition and shape, target appearance, and baking process
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-019

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.