Products and solutions

C STREAM-L Thinner

Thinner StreamerReference ID 4-005Thinner

Subject for development and selection consultation

Thinner for adjusting drying toward a slower rate

Related keywords

Drying adjustmentBalance with appearanceCoating compatibility

Overview / Summary Note

Consider drying speed
in relation to the finish.

A thinner for considering the balance of drying and appearance according to the coating in use and coating environment. It is a subject for development and selection consultation.

EVAPORATION / BALANCE
Illustrative concept diagram · Illustration of drying adjustment
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

For situations where drying seems too fast or the finish changes with seasonal or temperature changes.

Main applications and requirements

  • Reviewing drying rate
  • Considering responses to seasonal variation
  • Consultation on finish adjustment

Characteristics and mechanisms

01

Adjust drying speed

Consider the combination with the target coating for the purpose of adjusting drying toward a slower rate.

02

Consider the balance with appearance

Explore conditions suited to the process while examining drying progress and coating film finish together.

03

Start from the coating actually used

Check the coating, coating method, and environment, and proceed with evaluation while assessing compatibility.

Basic information and general technical explanation

Balancing solvency and evaporation

Solvents do more than dissolve resin; they also affect viscosity for ease of application and the condition of the coating film during drying. Changes in the combination of solvency and evaporation rate affect finish and workability. Even thinners with the same application name do not all have the same formulation, making compatibility with the target coating important. Sharing the coating name, coating method, and current issues helps identify the perspectives for considering a thinner.

Checks for selection and introduction

Consider the direction of adjustment while checking compatibility with the target coating and the finish.

Support from CoatureVietnam

By sharing the coating in use and the phenomena occurring, you can consult us about reviewing drying and coating conditions.

Related resources, Helpful Information and FAQ

Related Helpful Information

Types and characteristics of solvents

Introduces how solvents dissolve resins and affect viscosity and drying.

General properties of solvents

Introduces solvent selection considerations, including solubility, evaporation rate and surface tension.

Designing solvent composition

Introduces the basics of considering a dedicated thinner through the balance of dissolving power and evaporation.

Related trouble prevention and remedies

Process and application relevance08-005

Investigate blushing and whitening through high humidity and thinner selection

Why read this: To examine blushing through temperature, humidity, surface temperature and thinner drying rate.

Condition to check: When investigating blushing in solventborne coating

Process and application relevance08-004

Sagging and Bubbles Arise from Excessive Film Build and Spraying Too Close

Why read this: To check the balance of viscosity, film thickness, gun distance and drying.

Condition to check: When considering sagging and bubbles in spray coating

Process and application relevance08-010

Setting Time Causes Defects When It Is Too Short or Too Long

Why read this: To consider thinner drying behavior together with the time before heating and curing.

Condition to check: When the process includes a flash-off stage

Common consultation questions

Can this be used with any coating?

We consider it after checking compatibility with the target coating. Please share what you know about the product name and coating method currently used.

Consultation and inquiries

Please share the current coating and any concerns about drying or finish.

Information to prepare

  • Coating in use
  • Coating method and environment
  • Drying or finish concerns

When contacting us, please quote Reference ID: 4-005

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.