Products and solutions

Continuous and batch drying ovens

Coat SystemizerReference ID 5-009Drying and baking equipment

Subject for consultation on equipment configuration

Equipment for coating film drying and baking cure

Related keywords

Drying and bakingContinuous and batch typesConsider according to the process

Overview / Summary Note

A drying and baking process
suited to the coating and production.

Equipment used for drying after coating or for baking cure. Consider continuous, batch, and other methods according to workpiece size, production volume, and coating curing conditions.

TEMPERATURE / TIME / FLOW
Illustrative concept diagram · Illustration of a part-heating process
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

For reviewing baking conditions following a coating change or considering a drying process suited to production volume.

Main applications and requirements

  • Coating film drying
  • Baking cure
  • Establishing or reviewing production processes

Characteristics and mechanisms

01

Match production flow

Consider methods suited to production, such as continuous types that convey workpieces in sequence or batch types that treat a set quantity at a time.

02

Start from coating conditions

Build a process suited to coating film drying and curing, starting with the required temperature and time.

03

Configure according to the workpiece

Consider oven configuration and conveying method according to part geometry, size, and loading quantity.

Basic information and general technical explanation

The relationship between heating process and part temperature

In baking coating, the temperature of the coated part itself is a key factor in addition to the oven setpoint. Because heat-up behavior changes with part size and material, consider the required temperature and holding time together.

Process management suited to the material and coating specification is necessary. As a process following pretreatment and application, check the relationship between the part's heating condition and finish, and identify the required holding conditions.

Checks for selection and introduction

Consider based on the coating used, workpiece size, production volume, and installation location.

Support from CoatureVietnam

By sharing the current process and production approach, you can consult us about drying and baking equipment configurations.

Related resources, Helpful Information and FAQ

Related Helpful Information

Planning and preparing coating work

Introduces an approach that considers materials, coating specifications and process management together.

Related trouble prevention and remedies

Process and application relevance09-024

Check the Temperature Reached by the Workpiece, Not Just the Oven Setting

Why read this: To check the temperature actually reached by the workpiece and the holding time, as well as the displayed oven temperature.

Process and application relevance08-011

Control air, exhaust, and solvent vapor concentration in the drying oven

Why read this: To check the management of air, exhaust and solvent vapors in the drying oven.

Condition to check: For coating-drying processes involving volatile components such as solvents or water

Process and application relevance10-003

Make Energy Losses in Drying and Baking Ovens Visible

Why read this: To consider the required curing conditions together with energy losses from the oven.

Common consultation questions

Which is better, continuous or batch?

Consider product changeovers, upstream and downstream processes, and workpiece size together with production volume. Consultation can start from the current production flow.

Consultation and inquiries

Please share the target workpiece and what you want to review in production or baking.

Information to prepare

  • Target workpiece and coating used
  • Current process and approximate production volume
  • Points to consider for a new installation or review

When contacting us, please quote Reference ID: 5-009

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.