Products and solutions

Iron-phosphate and zinc-phosphate conversion treatment agents

Paint VoyagerReference ID 1-066Pretreatment agents

Related keywords

Pretreatment agentsPaint Voyager

Overview / Summary Note

Select phosphate treatment according to existing line conditions.

These are iron-phosphate and zinc-phosphate conversion treatment agents. They form a substrate film that supports coating adhesion and corrosion resistance, with the method selected according to performance requirements and process configuration. They are used to address existing lines or compare other pretreatment methods.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of material classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these agents when stabilizing current pretreatment or comparing methods in response to changing corrosion-resistance requirements.

Iron-phosphate and zinc-phosphate treatments differ in process configuration, film, and required management, so do not assess the change as a simple agent replacement.

Main applications and requirements

  • Forming coating substrates on metal products
  • Improving existing phosphate lines
  • Comparing pretreatment including required corrosion resistance and other methods

Characteristics and mechanisms

01

Select the role of each method

Compare process simplicity and required corrosion resistance according to the application and coating system.

02

Manage tanks and processes

Confirm the applicable steps for degreasing, rinsing, surface conditioning, conversion treatment, and drying.

03

Confirm performance on the completed coating film

Evaluate adhesion and corrosion resistance after topcoating, as well as the conversion film alone.

Basic information and general technical explanation

Changing the film-forming method also changes process conditions

Phosphate-film formation involves the substrate, bath management, temperature, time, carryover, and other factors. For zinc phosphate, also check the combination with surface conditioning and establish the process according to the selected specification.

Evaluate corrosion resistance through the combination of conversion film and coating film. Do not treat phosphate systems as phosphorus-free methods; compare operation including wastewater, sludge, and tank cleaning.

Checks for selection and introduction

Identify performance requirements and existing equipment, and compare operating conditions for each method.

Conditions to check when selecting

  • Target substrate, operating environment, and required corrosion resistance
  • Process configuration, bath management, temperature, and time
  • Topcoat compatibility, wastewater, sludge, and cleaning method

Support from CoatureVietnam

Please share the substrate, current method, required corrosion resistance, and operating issues. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Phosphate treatment before coating

Introduces how conversion coatings relate to adhesion and corrosion protection and the differences between treatment methods.

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Related trouble prevention and remedies

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To examine the relationships between oil, dirt, surface preparation, wettability and coating film adhesion.

Process and application relevance08-003

Investigate cratering, particle defects, and dirt contamination through the environment and surface preparation as well as the coating material

Why read this: To investigate cratering and foreign matter through substrate surface condition, preparation and environment as well as the paint.

Process and application relevance05-013

Integrating occupational health and safety into coating design—checking SDSs and the working environment

Why read this: To check the chemical SDS and conditions for handling, ventilation and protective equipment.

Common consultation questions

Is simply changing from iron phosphate to zinc phosphate sufficient?

Process configuration and management conditions also change. Confirm suitability including existing equipment, surface conditioning, and the coating system.

Consultation and inquiries

Please share the substrate, current method, required corrosion resistance, and operating issues. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the substrate, current method, required corrosion resistance, and operating issues
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-066

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.