Products and solutions

Low-reflectance coatings for sensors and cameras

Paint VoyagerReference ID 1-046Functional coatings

Coatings that reduce unwanted light reflections

Related keywords

Low reflectanceSensors and camerasOptical components

Overview / Summary Note

Reduce unwanted light inside the housing to support sensing.

These low-reflectance coatings reduce unwanted reflections inside sensors and cameras. Select systems that use near-infrared absorption and attenuation through multiple surface reflections according to metal, plastic, and other substrates and optical conditions. Confirm separately whether the surface appears black and whether it has low reflectance at the required wavelengths.

LIGHT / LOW REFLECTION
Illustrative concept diagram · Conceptual diagram of light and coating film
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these coatings when sensor miniaturization increases reflections inside the housing or stray light enters a camera.

Identify the paths of light entering the light-receiving section and the operating wavelengths. Check not only reflectance of the coating film alone but also sensing performance in the assembled state.

Main applications and requirements

  • Stray-light measures inside distance-sensor and camera housings
  • Sensing equipment using near-infrared light
  • Low-reflectance treatment of metal and plastic parts

Characteristics and mechanisms

01

Evaluate reflectance at operating wavelengths

Check reflectance in the wavelength range used by the equipment, as well as visible blackness.

02

Select a substrate-appropriate product family

Confirm suitability separately for plastic, metal, and multiple-substrate types.

03

Verify the entire optical system

Evaluate how film thickness, surface geometry, and placement affect light reception and sensing.

Basic information and general technical explanation

Low gloss and low reflectance require different evaluations

Even matte black does not necessarily absorb near-infrared light sufficiently. Use consistent wavelengths, incidence angles, and measurement methods to check total reflectance and stray light within the optical system.

Inside the housing, adhesion, wear, temperature and humidity changes, and particle shedding may affect optical components. Assess suitability through the application conditions of the selected product and evaluation of the completed sensor or camera.

Checks for selection and introduction

Clarify operating wavelengths and stray-light paths, then evaluate the actual optical configuration.

Conditions to check when selecting

  • Wavelengths, incidence angles, and reflectance and sensing evaluation methods
  • Substrate, coating area, film thickness, and curing conditions
  • Adhesion, environmental resistance, and effects on optical components

Support from CoatureVietnam

Please share the sensor or camera, operating wavelengths, substrate, and stray-light issues. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related trouble prevention and remedies

Reference for selection and evaluation05-002

Decide What the Coating Film Must Achieve Before Selecting Paint

Why read this: To clarify the application and required performance by considering what the coating film needs to achieve.

Condition to check: Confirm guaranteed values for individual functions in the product documentation

Reference for selection and evaluation02-009

How to Read Test Data Correctly: Specification Values Alone Cannot Resolve Shop-Floor Problems

Why read this: To examine functional evaluation through test methods and actual service conditions.

Condition to check: This article does not provide performance data for an individual product

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To check the substrate, surface preparation, film thickness and adhesion conditions.

Common consultation questions

Does this serve the same purpose as a matte black coating?

Visible gloss and reflectance at the required wavelengths are separate properties. Confirm through measurements suited to the optical conditions and evaluation of the equipment.

Consultation and inquiries

Please share the sensor or camera, operating wavelengths, substrate, and stray-light issues. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the sensor or camera, operating wavelengths, substrate, and stray-light issues
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-046

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.