Products and solutions

Waterborne organic zinc-rich paint

Paint VoyagerReference ID 1-074Waterborne and environmentally considerate coatings

Related keywords

Waterborne and environmentally considerate coatingsPaint Voyager

Overview / Summary Note

Manage waterborne zinc-dust rust prevention through mixing and drying.

This waterborne organic zinc-rich paint is used by mixing the coating liquid with zinc powder. Consider it as a candidate for protecting steel while reviewing solvent use and odor. Check pot life after mixing, surface preparation, humidity, ventilation, and recoating.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

This is a candidate when considering zinc-dust rust prevention at sites where solvent odor is a concern or comparing waterborne coating systems.

Even with waterborne coatings, oil removal, required film thickness, and sufficient drying are necessary. Identify humidity and protection conditions at the application site.

Main applications and requirements

  • Waterborne rust prevention for steel and galvanizing
  • On-site repairs with attention to odor
  • Considering waterborne primer and topcoat structures

Characteristics and mechanisms

01

Mix coating liquid and powder

Use the specified ratio and stirring to achieve uniformity, and manage the usable time after mixing.

02

Check waterborne drying

Apply with humidity, ventilation, rain, and condensation effects in mind.

03

Distinguish the role over old coating films

Over old coating films, the same electrochemical action of zinc as on bare steel is not obtained.

Basic information and general technical explanation

Manage handling after mixing separately from waterborne drying

Mix the coating liquid and powder at the specified ratio and using the specified procedure. Mixed material cannot necessarily be kept for later storage, so prepare an amount suited to the pot life.

Surfaces with residual oil can cause poor wetting. Do not omit surface preparation even for waterborne coatings; check film thickness, recoating, and drying. Evaluate protective action separately on old coating films and bare steel areas.

Checks for selection and introduction

Check the substrate and establish an application plan suited to the mixing quantity, temperature, and humidity.

Conditions to check when selecting

  • Substrate and condition of residual oil, rust, and old coating films
  • Specified ratio, stirring, mixing quantity, and pot life
  • Film thickness, temperature and humidity, ventilation, recoating, and protection during drying

Support from CoatureVietnam

Please share the application substrate, site temperature and humidity, usage quantity, and coating method. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Characteristics of water as a solvent

Introduces water's evaporation and wetting properties and the differences to consider in waterborne coating.

Why apply paint in multiple layers?

Introduces the roles of primers and topcoats and their combination within the complete coating system.

Related trouble prevention and remedies

Process and application relevance06-004

Why rust can occur even with rust-preventive coatings

Why read this: To review the substrate, surface preparation, film thickness and service environment as well as the anti-corrosion paint.

Process and application relevance06-003

Reading the Cause from the Pattern of Rust

Why read this: To identify factors requiring investigation from the appearance and location of the rust.

Process and application relevance11-013

Do not judge corrosion-protection coating by initial price alone: Recoating intervals and life-cycle cost

Why read this: To consider corrosion-protection specifications and recoating intervals from a maintenance perspective.

Condition to check: When considering long-term corrosion-protection and maintenance plans

Common consultation questions

Can mixed material be stored until the next day?

Check the selected product's pot life and storage conditions. Prepare the necessary quantity without assuming that leftover mixed material can be stored for later use.

Consultation and inquiries

Please share the application substrate, site temperature and humidity, usage quantity, and coating method. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the application substrate, site temperature and humidity, usage quantity, and coating method
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-074

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.