Products and solutions

Fluoropolymer powder coatings

Paint VoyagerReference ID 1-017Powder coatings

Related keywords

Powder coatingsPaint Voyager

Overview / Summary Note

Consider fluoropolymer powder for exterior weather resistance.

Fluoropolymer powder coatings for high-weather-resistance applications such as exterior building materials. In addition to standard families, there are designs forming two layers during baking and bonded metallic types. Select after checking differences in coating-film structure and appearance.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these when maintaining the finish of exterior metal components over time or comparing solvent-based baked coatings with powder application.

Distinguish single-layer finishes from designs that separate into two layers, and check mass-production conditions from pretreatment to baking and reclaimed-powder operation.

Main applications and requirements

  • High-weather-resistance powder finishes for exterior building materials
  • Comparing liquid-coating and powder-coating methods
  • Considering suitability of two-layer-separating and metallic decorative types

Characteristics and mechanisms

01

Emphasize outdoor appearance retention

Check the relevant fluoropolymer products against the required weather resistance.

02

Check differences in film structure

Evaluate two-layer-separating types under specified conditions as designs that include layer formation during baking.

03

Coordinate appearance and powder reclamation

For metallic types, manage appearance changes resulting from pigment condition, reclaimed powder, and application conditions.

Basic information and general technical explanation

Evaluate two-layer-separating types including layer formation during baking

Two-layer-separating types are designed so that the applied powder forms layers during baking. This differs from applying a liquid coating twice; check according to the selected product's film-thickness and baking conditions.

Weather resistance depends on pigments, curing, pretreatment, and film thickness as well as resin classification. Evaluate adhesion and appearance on actual components, and cross-check required standards and the scope of any guarantee for each product and color.

Checks for selection and introduction

Select after checking exterior performance requirements and film formation on actual components.

Conditions to check when selecting

  • Components, pretreatment, and required weather resistance
  • Single-layer or two-layer-separating type, film thickness, and baking conditions
  • Finish sample and mass-production operation including reclaimed powder

Support from CoatureVietnam

Please share the exterior components, required weather resistance, desired finish, and coating process. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Fluoropolymer powder coatings

Introduces thermosetting and thermoplastic systems and the relationship between applications and heating processes.

Types of powder coatings

Introduces thermosetting and thermoplastic systems and coating film formation through heating.

Related trouble prevention and remedies

Process and application relevance08-012

Moisture and oil cause particle defects and blockages in powder coating

Why read this: To review moisture and oil in the powder, compressed air and storage environment when identifying causes of particles and blockages.

Process and application relevance07-015

Baking Ovens, Cooling, and Reclaimed-Powder Control in Powder Coating

Why read this: To check baking, cooling and the handling of recovered powder against the selected process.

Condition to check: Recovered-powder management applies when a recovery process is used

Process and application relevance02-009

How to Read Test Data Correctly: Specification Values Alone Cannot Resolve Shop-Floor Problems

Why read this: To examine test data and evaluation conditions for the required appearance and functionality.

Common consultation questions

Do all fluoropolymer powders have the same two-layer structure?

Film structure differs by product family. Distinguish standard, two-layer-separating, and metallic types and check the selected product's documentation.

Consultation and inquiries

Please share the exterior components, required weather resistance, desired finish, and coating process. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the exterior components, required weather resistance, desired finish, and coating process
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-017

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.