Products and solutions

Pre-coating treatment agent as an alternative to phosphates

Paint VoyagerReference ID 1-058Pretreatment agents

Related keywords

Pretreatment agentsPaint Voyager

Overview / Summary Note

Consider pretreatment that reviews post-treatment rinsing, through to drying.

This pre-coating treatment agent uses a sealing method as an alternative to phosphates. Consider the relevant phosphorus- and fluorine-free system together with water savings and reviews of heating and cleaning burdens. Even in a configuration omitting rinsing after treatment, upstream cleaning and rinsing and drying after treatment still require confirmation.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of material classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this agent when reducing water use or cleaning burdens in the pretreatment process, or comparing with existing iron-phosphate treatment.

Clarify which parts of the process can be shortened and evaluate performance on dried components and the completed coating film including the topcoat.

Main applications and requirements

  • Pre-coating treatment as an alternative to phosphates
  • Reviewing post-treatment rinsing, heating, and cleaning burdens
  • Comparing water savings and coating quality on existing lines

Characteristics and mechanisms

01

Consider shortening the process

Check a configuration omitting post-treatment rinsing against the target material and equipment conditions.

02

Secure upstream cleanliness

The state of degreasing and upstream rinsing affects treatment and subsequent coating.

03

Dry before proceeding to coating

Manage drying after treatment as a required step and evaluate topcoat compatibility.

Basic information and general technical explanation

No post-treatment rinsing does not mean no rinsing anywhere in the process

With this method, consider rinsing after degreasing separately from the steps after sealing. It does not mean omitting rinsing throughout the process while leaving upstream contamination or carryover in place.

Insufficient drying or pooled liquid after treatment may affect subsequent coating. Check adhesion and corrosion resistance under a specification that includes part geometry, drainage, drying, and the selected coating.

Checks for selection and introduction

Confirm which steps can be omitted and manage the remaining cleaning, rinsing, and drying.

Conditions to check when selecting

  • Substrate, part geometry, and current treatment process
  • Degreasing, upstream rinsing, carryover, and drainage
  • Treatment conditions, drying, and adhesion and corrosion resistance after topcoating

Support from CoatureVietnam

Please share the current process, water-use and cleaning issues, and drying conditions. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Phosphate treatment before coating

Introduces how conversion coatings relate to adhesion and corrosion protection and the differences between treatment methods.

Related trouble prevention and remedies

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To examine the relationships between oil, dirt, surface preparation, wettability and coating film adhesion.

Process and application relevance08-003

Investigate cratering, particle defects, and dirt contamination through the environment and surface preparation as well as the coating material

Why read this: To investigate cratering and foreign matter through substrate surface condition, preparation and environment as well as the paint.

Process and application relevance05-013

Integrating occupational health and safety into coating design—checking SDSs and the working environment

Why read this: To check the chemical SDS and conditions for handling, ventilation and protective equipment.

Common consultation questions

Can adopting this agent eliminate all rinsing and drying?

It does not eliminate the entire process. Check the process conditions for the specific method, including upstream rinsing and drying after treatment.

Consultation and inquiries

Please share the current process, water-use and cleaning issues, and drying conditions. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the current process, water-use and cleaning issues, and drying conditions
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-058

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.