Products and solutions

Organic temporary rust preventive

Paint VoyagerReference ID 1-059Pretreatment agents

Related keywords

Pretreatment agentsPaint Voyager

Overview / Summary Note

Address rust between processes to prepare for the next treatment.

This organic temporary rust preventive is used after cleaning or during temporary process shutdowns. It forms a thin protective layer and is considered for addressing rust formation until the next step. Distinguish this application from long-term outdoor corrosion protection, and check pooled liquid, storage conditions, and effects on subsequent coating.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of material classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this agent when rust forms after cleaning or when protecting wet components during line shutdowns.

Clarify the process step where it will be incorporated and the time until the next treatment, and check drainage, drying, and compatibility with downstream processes.

Main applications and requirements

  • Rust prevention between processes after cleaning
  • Protection during temporary shutdowns of pretreatment lines
  • Considering short-term storage conditions before coating

Characteristics and mechanisms

01

For temporary protection

Confirm the required protection period for applications intended to suppress corrosion until the next step.

02

Check compatibility with subsequent processes

Evaluate conditions for proceeding to cleaning and coating and the effects of the remaining film.

03

Consider pooled liquid separately

Check poor drainage and local liquid retention caused by geometry together with the application scope.

Basic information and general technical explanation

Manage temporary rust prevention according to the process and storage period

Metal surfaces after cleaning may corrode again through contact with moisture and air. Temporary rust prevention is protection considered for these conditions between processes.

The remaining film changes with rinsing and other operations, and the same effect may not be expected in pooled liquid. Confirm adhesion and corrosion resistance of the final coating, and do not treat this as serving the same role as long-term corrosion-protective coating.

Checks for selection and introduction

Determine the process and duration to be protected, and evaluate through to the next treatment.

Conditions to check when selecting

  • Substrate, application step, and shutdown and storage time
  • Drainage, pooled liquid, drying, temperature, and humidity
  • Compatibility with rinsing and coating and effects of the remaining film

Support from CoatureVietnam

Please share the step where rust forms, storage time, and next treatment. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Related trouble prevention and remedies

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To examine the relationships between oil, dirt, surface preparation, wettability and coating film adhesion.

Process and application relevance08-003

Investigate cratering, particle defects, and dirt contamination through the environment and surface preparation as well as the coating material

Why read this: To investigate cratering and foreign matter through substrate surface condition, preparation and environment as well as the paint.

Process and application relevance05-013

Integrating occupational health and safety into coating design—checking SDSs and the working environment

Why read this: To check the chemical SDS and conditions for handling, ventilation and protective equipment.

Common consultation questions

Can a temporary rust preventive alone provide long-term outdoor protection?

The conditions differ from use between processes. Check documentation and evaluation corresponding to the required period and environment.

Consultation and inquiries

Please share the step where rust forms, storage time, and next treatment. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the step where rust forms, storage time, and next treatment
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-059

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.