Products and solutions

Degreasing agent for steel

Paint VoyagerReference ID 1-060Cleaning agents

Related keywords

Cleaning agentsPaint Voyager

Overview / Summary Note

Remove oil and fine contamination to prepare the coating substrate.

This degreasing agent removes processing oils, rust-preventive oils, and fine contamination from steel surfaces. Select water-based alkaline agents and other systems according to oil type and immersion or spray method. Establish suitable cleaning and rinsing conditions for subsequent conversion treatment and coating.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of material classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this agent when adhesion is unstable despite consistent coating conditions, or when pretreatment becomes less effective after a change in oil type.

Check residual oil, fine particles, and redeposition as well as visible contamination, and review treatment-tank operation.

Main applications and requirements

  • Degreasing steel components before coating
  • Removing processing oils, rust-preventive oils, and dust
  • Improving immersion and spray cleaning and tank management

Characteristics and mechanisms

01

Select according to contamination type

Consider a system suited to the combination of processing oils, rust-preventive oils, fine particles, and other contaminants.

02

Treat according to the method

Check temperature, time, and mechanical action for immersion and spray treatment.

03

Prepare for rinsing and conversion treatment

Reduce residue and redeposition after cleaning and prepare a surface suited to the next process.

Basic information and general technical explanation

Degreasing is not determined by agent concentration alone

Cleaning effectiveness involves concentration, temperature, time, spray impingement, and other factors. As oil and contamination carried into the treatment tank increase, redeposition or uneven cleaning may result.

Check cleanliness using water-break behavior and other methods, and evaluate under conditions including rinsing and downstream processes. For steel, also consider rust recurrence after cleaning and manage the waiting time before coating.

Checks for selection and introduction

Identify contamination and treatment method, and check tank management through to downstream processes.

Conditions to check when selecting

  • Oil and contamination types and carryover quantity
  • Concentration, temperature, time, and spray and immersion conditions
  • Rinsing, cleanliness, rust recurrence, and compatibility with conversion treatment and coating

Support from CoatureVietnam

Please share the steel substrate, oil type, and current degreasing and rinsing conditions. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Related trouble prevention and remedies

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To examine the relationships between oil, dirt, surface preparation, wettability and coating film adhesion.

Process and application relevance08-003

Investigate cratering, particle defects, and dirt contamination through the environment and surface preparation as well as the coating material

Why read this: To investigate cratering and foreign matter through substrate surface condition, preparation and environment as well as the paint.

Process and application relevance05-013

Integrating occupational health and safety into coating design—checking SDSs and the working environment

Why read this: To check the chemical SDS and conditions for handling, ventilation and protective equipment.

Common consultation questions

Will increasing degreaser concentration solve poor adhesion?

Other conditions also matter. Check oil type, tank contamination, temperature, rinsing, and downstream processes together.

Consultation and inquiries

Please share the steel substrate, oil type, and current degreasing and rinsing conditions. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the steel substrate, oil type, and current degreasing and rinsing conditions
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-060

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.