Products and solutions

High-zinc-dust-content coating

Paint VoyagerReference ID 1-067Zinc-dust coatings

Related keywords

Zinc-dust coatingsPaint Voyager

Overview / Summary Note

Restore zinc corrosion protection to exposed steel.

This organic zinc-rich paint contains a high concentration of zinc dust. Consider it for rust prevention on steel and repairs to galvanizing as a method that uses zinc's electrochemical protection. Treat rust, existing coating, and oil, and prepare a coating surface where the steel and zinc can make contact.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

This is a candidate when repairing cut edges, welds, or damaged areas of galvanized steel, or considering on-site rust prevention for steel.

Before color matching, check the substrate and required film thickness, and identify application conditions according to whether the work is a local repair or full-surface coating.

Main applications and requirements

  • Repairing cut edges and welds on galvanized steel
  • On-site rust prevention for steel
  • Comparing application methods using cans and spray products

Characteristics and mechanisms

01

Use protection provided by zinc

Establish conditions in which zinc particles contact the steel and consider the corrosion-protection action.

02

Consider repairs at ambient temperature

Check drying and handling for steel protection by on-site coating.

03

Manage the substrate and film thickness

Check a clean substrate, stirring, and required film thickness according to the application method.

Basic information and general technical explanation

Contact between the zinc-dust coating film and steel is important

Zinc's corrosion-protection action involves electrical contact with the steel. The same action is not necessarily obtained where the coating is applied over remaining insulating old coating or red rust.

Stir with zinc-dust settling in mind and secure the required film thickness. Application and film-thickness management differ between cans and spray products, so evaluate according to the selected product's procedure.

Checks for selection and introduction

Identify the repair substrate and application method, and confirm required film thickness and finish.

Conditions to check when selecting

  • Condition of bare steel, galvanizing, and old coating films
  • Rust and oil removal, stirring, film thickness, and drying
  • Application method, corrosive environment, and whether a topcoat is needed

Support from CoatureVietnam

Please share the repair area, galvanizing and rust condition, and application method. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Why apply paint in multiple layers?

Introduces the roles of primers and topcoats and their combination within the complete coating system.

Related trouble prevention and remedies

Process and application relevance06-004

Why rust can occur even with rust-preventive coatings

Why read this: To review the substrate, surface preparation, film thickness and service environment as well as the anti-corrosion paint.

Process and application relevance06-003

Reading the Cause from the Pattern of Rust

Why read this: To identify factors requiring investigation from the appearance and location of the rust.

Process and application relevance11-013

Do not judge corrosion-protection coating by initial price alone: Recoating intervals and life-cycle cost

Why read this: To consider corrosion-protection specifications and recoating intervals from a maintenance perspective.

Condition to check: When considering long-term corrosion-protection and maintenance plans

Common consultation questions

Does zinc act in the same way over an old coating film?

If electrical contact is blocked, the same corrosion-protection action cannot be expected. Check the substrate and selected specification.

Consultation and inquiries

Please share the repair area, galvanizing and rust condition, and application method. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the repair area, galvanizing and rust condition, and application method
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-067

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.