Tiếng Việt1 High-Speed Color Change Booth: Magic Series
The Magic Series is recognized worldwide for enabling high-speed color changes in powder coating. By using a “sandwich-structured” plastic wall, these booths prevent powder buildup. The intermittent air purge feature also prevents powder from piling up on the booth floor. As a result, very little powder remains inside, making color changes quick and efficient.
- MagicCylinder
A cylindrical booth with a diameter of 2.5 meters, featuring a seamless interior that prevents powder from accumulating in corners. The floor can be configured in two ways: a cone shape with a hole in the center or a flap shape suitable for low-floor setups. During cleaning, you can easily access the entire interior from the booth entry, minimizing color change costs. - MagicCompactBA03
Uses a patented slit design that increases airflow at the booth entrance while reducing it around the spray gun area, improving transfer efficiency. This design also achieves higher coating quality without needing an excessively large booth or dust collector. You can simply install a small deck at the booth entrance for any required touch-ups. - MagicCompact
Compactly designed to replace older solvent-based booths with low conveyor heights or to fit in limited spaces. With two flaps on the floor that can open and close depending on whether you are coating or cleaning, it increases coating efficiency and simplifies cleaning. Touch-up spraying is also possible by placing a simple deck at the booth entrance. - MagicPlus
A rectangular booth design that allows for the installation of multiple reciprocators and dedicated correction zones. It can easily accommodate large workpieces, making it flexible for a wide range of coating needs.
2 Powder Coating Booth
- Diamond Booth (for Automatic Systems)
Adopts polycarbonate panels on the booth walls, reducing powder adherence to about 1/50 to 1/30 of what you’d get with stainless steel. As a result, cleaning time is shortened to about half or one-third, boosting productivity. - Classic Series (for Handgun Use)
Comes with a built-in control panel, allowing you to start using it immediately after hooking up power and air. Casters make it easy to rearrange the layout, enabling flexible operation according to your workspace.- The bag filter is shaped more like a cone than a traditional cylinder, improving the powder shake-off effect.
- Two filter setups are available: a two-filter (67 Nm³/min) version and a four-filter (110 Nm³/min) version.
- You can choose from box-type, open-type, or booth-attached designs, as well as a recovered or non-recovered powder system.
Because of these options, each powder coating booth model can be customized to recover or not recover powder, fitting the specific environment and production requirements of your facility.