Electrostatic Powder Coating Equipment

Device for Powder

1. Powder Handgun: OptiFlex 2 Series

The “OptiFlex 2 Series,” now in its third generation since going fully digital, incorporates many new technologies. These include a new high-voltage cascade for outstanding powder transfer efficiency, innovative technology nozzles optimized for coating coverage, and a Precision Current Control feature that can adjust current values in 0.5 µA increments when under 10 µA. All of these enhancements further advance the fundamental performance of the gun.

OptiFlex 2 Product Variations

OptiFlex2-B
A box-type system where you can place a manufacturer’s powder box directly on a tilted vibrating table. It makes color changes easy and is ideal for multi-color painting. It can handle two guns at once.
OptiFlex2-F (Fluidized Hopper Type)
Equipped with a 50L fluidized hopper, this type is perfect for single-color operations or applications requiring high uniformity. It can handle two guns at once.
OptiFlex2-S (Agitation Tank Type)
Suitable for powders that have poor flow properties or are difficult to handle. Because it doesn’t use suction air, it creates a softer spray pattern and is also optimal for coating detailed parts
OptiFlex2-W (Wall-Mount Type)
Ideal for use in the hand-spraying section of an automatic powder coating booth or for installations where space is limited. Powder can be placed in a remote hopper or another location away from the gun
OptiFlex2-L (Laboratory Type)
Appropriate for coating small batches or individual pieces, as well as creating sample test pieces
OptiFlex2-C (Agitation Tank Type)
Developed for very small amounts of powder, making it suitable for powder manufacturers or chemical manufacturers. It is ideal for test coatings of powder samples. You can purchase just the cup separately, and if you already have any one of the types from 1 to 5, you can easily convert it for small-lot coating by using the “C” type

 

2 Automatic Powder Gun: Opti Series

The Opti Series is an innovative automatic powder coating system designed to maintain a consistent, high level of coating quality while reducing operator workload as much as possible.

Main Products in the Opti Series

Electrostatic Powder Automatic Gun: OptiGun GA02
A powder automatic gun with extremely high transfer efficiency. In addition to the standard type (Opti-A), there is the Opti-AX model designed to maximize easy color change
Gun Controller: OptiStar
A second-generation automatic controller that inherits the technology of the first fully digital OptiTronic series
OptiFlex Automatic (Automated Coating System)
Capable of expanding up to 14 OptiStar gun controllers. It’s perfect for small-to-medium-sized coating lines and can be adapted to existing lines. For fully automated lines, you can install a touch panel control unit and various additional modules
Powder Management Center: OptiCenter
A key factor in fast color changes, it handles powder supply/recovery and rapid cleaning of the powder circuit. It reduces color change time, improves reliability and ease of use, and helps lower staffing needs. It also contributes to higher coating quality

 

    Form đăng ký nhận bản tin email

    SUBSCRIBE TO THE NEWSLETTER EMAIL

     

    Leave a Reply

    Your email address will not be published. Required fields are marked *