Products and solutions

Far-infrared emissive and high-efficiency radiant coatings

Paint VoyagerReference ID 1-048Thermally functional coatings

Related keywords

Thermally functional coatingsPaint Voyager

Overview / Summary Note

Connect the heat source and heated object through radiation wavelengths.

This category combines emissive coatings emphasizing far-infrared radiation and coatings using radiation across a broad infrared range. They are applied to heat-source surfaces such as heaters, with the type selected according to the wavelengths absorbed by the heated object, temperature, and arrangement.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these coatings when you want to use heat-source radiation for heating or review the combination of heater and heated object.

Identify the heat-source surface temperature, the object's material, distance, and visible area, and evaluate heating speed and uniformity.

Main applications and requirements

  • Radiating surfaces of heaters and space-heating equipment
  • Considering heating using far-infrared radiation
  • Comparing heat utilization including heat-source and object arrangement

Characteristics and mechanisms

01

Select according to wavelength range

Distinguish systems emphasizing far-infrared radiation from systems covering a broad wavelength range.

02

Use heat-source surface characteristics

Consider radiation from the heat source according to the object to be heated.

03

Confirm effectiveness at equipment level

Evaluate a configuration that includes heat-source temperature, distance, obstructions, and the object's absorption.

Basic information and general technical explanation

High emissivity does not mean every object heats in the same way

Heat transfer by radiation varies with heat-source temperature, wavelength, the object's absorption characteristics, and relative positioning. Heating effectiveness cannot be determined solely from the coating's emission characteristics.

Confirm the heat-resistance temperature together with application and operating conditions. In addition to adhesion to the heat source, film thickness, and curing, compare the object's temperature distribution and energy consumption using actual equipment.

Checks for selection and introduction

Clarify the heated object and heat-source conditions, then select according to wavelengths and arrangement.

Conditions to check when selecting

  • Heat-source temperature, operating wavelength range, and heated-object material
  • Distance, arrangement, obstructions, and required temperature distribution
  • Substrate, film thickness, curing, and thermal history during use

Support from CoatureVietnam

Please share the heat source, heated object, current temperature distribution, and arrangement. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related trouble prevention and remedies

Reference for selection and evaluation05-002

Decide What the Coating Film Must Achieve Before Selecting Paint

Why read this: To clarify the application and required performance by considering what the coating film needs to achieve.

Condition to check: Confirm guaranteed values for individual functions in the product documentation

Reference for selection and evaluation02-009

How to Read Test Data Correctly: Specification Values Alone Cannot Resolve Shop-Floor Problems

Why read this: To examine functional evaluation through test methods and actual service conditions.

Condition to check: This article does not provide performance data for an individual product

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To check the substrate, surface preparation, film thickness and adhesion conditions.

Common consultation questions

Do far-infrared and high-efficiency radiant types have the same characteristics?

They emphasize different wavelength ranges. Evaluate the suitable type according to the combination of heat source and heated object.

Consultation and inquiries

Please share the heat source, heated object, current temperature distribution, and arrangement. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the heat source, heated object, current temperature distribution, and arrangement
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-048

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.