Products and solutions

Insulating powder coating with high edge coverage

Paint VoyagerReference ID 1-049Insulating coatings

Related keywords

Insulating coatingsPaint Voyager

Overview / Summary Note

Insulate conductor corners as well as flat surfaces.

This insulating powder coating provides high edge coverage for conductors such as busbars. It emphasizes coverage of corners, where the coating film tends to be thinner than on flat surfaces, and is evaluated on the actual geometry to determine whether the required insulation can be secured. Consider film thickness, pretreatment, curing, and electrical requirements together.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this coating when insulation-film thickness is insufficient at conductor corners or when you want to cover complex shapes with powder coating.

Do not assess solely by average film thickness on flat surfaces. Check the minimum film thickness and defects at corners and around connections.

Main applications and requirements

  • Busbar insulation for automotive electrical components and similar applications
  • Conductor coverage including corners and edges
  • Considering a primary insulation process using powder coating

Characteristics and mechanisms

01

Emphasize corner coverage

Check the effective film thickness in areas likely to become thin after curing.

02

Evaluate according to conductor geometry

Confirm suitability at part level, including corner geometry, connections, and masking.

03

Identify electrical and thermal requirements

Evaluate operating temperature and environment along with voltage withstand capability.

Basic information and general technical explanation

Check insulation performance at thin areas and defects

Even with sufficient film thickness on flat surfaces, thin films at corners or pinholes may become weak points in the insulation. Check geometries that concentrate the electric field and the required coverage area.

A material's dielectric breakdown characteristics cannot be directly converted into the voltage withstand capability of a finished part. Assess through evaluations that include film-thickness distribution, curing, and operating temperature and humidity on actual components.

Checks for selection and introduction

Identify conductor geometry and electrical requirements, and evaluate coverage through to the corners.

Conditions to check when selecting

  • Conductor material, corner geometry, and masking area
  • Coating method, pretreatment, film-thickness distribution, and curing conditions
  • Requirements for voltage withstand capability, operating temperature, moisture, vibration, and other conditions

Support from CoatureVietnam

Please share conductor geometry, required insulation conditions, and the coating and curing process. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Electrical insulating paints

Introduces the role of electrically insulating coating films and evaluation considerations, including temperature and humidity.

Types of powder coatings

Introduces thermosetting and thermoplastic systems and coating film formation through heating.

Related trouble prevention and remedies

Process and application relevance08-012

Moisture and oil cause particle defects and blockages in powder coating

Why read this: To review moisture and oil in the powder, compressed air and storage environment when identifying causes of particles and blockages.

Process and application relevance07-015

Baking Ovens, Cooling, and Reclaimed-Powder Control in Powder Coating

Why read this: To check baking, cooling and the handling of recovered powder against the selected process.

Condition to check: Recovered-powder management applies when a recovery process is used

Process and application relevance02-009

How to Read Test Data Correctly: Specification Values Alone Cannot Resolve Shop-Floor Problems

Why read this: To examine test data and evaluation conditions for the required appearance and functionality.

Common consultation questions

Is sufficient film thickness on flat surfaces enough to secure insulation?

Evaluation of actual parts, including corners, edges, and defects, is required. Do not assess finished-part insulation solely by average film thickness.

Consultation and inquiries

Please share conductor geometry, required insulation conditions, and the coating and curing process. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: conductor geometry, required insulation conditions, and the coating and curing process
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-049

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.