Products and solutions

Immersion, continuous, and enclosed-chamber cleaning equipment

Coat SystemizerReference ID 5-001Cleaning and pretreatment equipment

Related keywords

Cleaning and pretreatment equipmentCoat Systemizer

Overview / Summary Note

Configure cleaning to suit the process.

This group of equipment performs surface treatment before coating, such as degreasing and cleaning. Select the method according to the objects to be treated and production flow.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of equipment classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

For considering cleaning quality, throughput, and working methods through equipment.

Main applications and requirements

  • Part pretreatment
  • Upgrading cleaning equipment
  • Considering treatment-process configuration

Characteristics and mechanisms

01

The role of this category

This group of equipment performs surface treatment before coating, such as degreasing and cleaning. Select the method according to the objects to be treated and production flow.

02

Match the workpiece

Consider tank and conveying configurations based on geometry, contamination, and throughput.

03

Connect upstream and downstream processes

Identify required steps such as feeding, cleaning, rinsing, and drying.

Basic information and general technical explanation

The connection between cleaning and coating quality

Treatment combines chemical action with methods such as immersion or spraying. Consider the configuration including solution management, workpiece carryout, and drying.

In cleaning before coating, it is important to establish the condition of oil, rust, and other substances remaining on the substrate surface. Share contamination types and downstream processes and consider an equipment configuration suited to the flow from cleaning to coating.

Checks for selection and introduction

Check the workpiece, contamination, required treatment, throughput, and installation conditions.

Support from CoatureVietnam

By sharing the target workpiece, current equipment, and work you want to review, you can consult us about the conditions to confirm and how to proceed with evaluation. The specific scope of support is confirmed according to the details.

Related resources, Helpful Information and FAQ

Related Helpful Information

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Related trouble prevention and remedies

Process and application relevance02-005

Poor Adhesion Is Not Just a Paint Problem: Assessing the Substrate, Surface Preparation, and Wettability

Why read this: To examine the relationships between oil, dirt, surface preparation, wettability and coating film adhesion.

Process and application relevance08-003

Investigate cratering, particle defects, and dirt contamination through the environment and surface preparation as well as the coating material

Why read this: To investigate cratering and foreign matter through substrate surface condition, preparation and environment as well as the paint.

Process and application relevance05-013

Integrating occupational health and safety into coating design—checking SDSs and the working environment

Why read this: To check the chemical SDS and conditions for handling, ventilation and protective equipment.

Common consultation questions

Can I consult you even if detailed conditions have not yet been decided?

Yes. Please share what you know about the target workpiece, current equipment, and work you want to review. Consultation can begin by organizing the information needed for evaluation.

Consultation and inquiries

Please share what you know about the application and any issues you are experiencing.

Information to prepare

  • Target workpiece and process
  • Current equipment
  • What you would like to discuss

When contacting us, please quote Reference ID: 5-001

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.