Form the coating film by reaction
Mix the base component and curing agent to create a protective polyurethane film suited to the application.
Related keywords
Create industrial-product finishes without relying excessively on heating.
Two-component polyurethane coatings used for appearance and protection of industrial products. They form films through reaction between the base component and curing agent and are considered for finishes on machinery and similar products. Mixing ratio, pot life, and the need for a primer vary by product, so check the selected product's specification.
Consider these when finishing large machines or products that are difficult to place in a baking oven.
Even where transport must proceed quickly, surface drying and sufficient curing are separate matters. Check handling after coating as well as contact with oils and chemicals during service.
Mix the base component and curing agent to create a protective polyurethane film suited to the application.
Evaluate gloss and smoothness together with conditions involving contact with oil or cleaning chemicals.
Manage the quantity mixed and usable time, accounting for temperature-related changes in reaction rate.
The curing reaction progresses after mixing, so even if viscosity appears suitable for application, use beyond the specified pot life is not necessarily possible. Adding solvent later cannot reverse the reaction.
Drying and curing are also affected by temperature and film thickness. Check primer compatibility and recoating intervals, and evaluate appearance, adhesion, and required resistance in the actual process.
Coordinate the coating system and mixing management, then define conditions through handling and the start of service.
Please share the machines or components, primer, required appearance, and service conditions. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.
Explains how urethane bonds form a coating film and how hardness relates to flexibility.
Introduces base-to-hardener ratios, the reaction after mixing and the time during which mixed paint remains usable.
Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.
Why read this: To review the substrate, surface preparation and wettability when identifying causes of poor adhesion.
Why read this: To examine paint drying and curing mechanisms and the process conditions specified for the product concerned.
Why read this: To examine gloss and finish in relation to the underlying surface, film thickness and drying conditions.
Condition to check: When considering appearance and gloss conditions
Check the specified pot life. Thinning does not reverse the curing reaction and may affect film performance and appearance.
Please share the machines or components, primer, required appearance, and service conditions. You are welcome to consult us using whatever information is currently available.
When contacting us, please quote Reference ID: 1-023
Copy the text below, add your on-site situation and send it to us via the Contact page.
You can summarize the situation on site and what you want to confirm even before choosing a product.
A: This service is designed to propose high-value-added Japanese paints to customers and efficiently deliver them to your doorstep.
A: Paint Voyager is a service that suggests high-value-added Japanese paints and enables efficient procurement even in small quantities.
A: We leverage our trusted relationships with Japanese paint manufacturers to efficiently source a wide range of paint products from Japan.
A: Yes, we offer a range of support beyond paints, providing various materials to help you achieve your coating requirements.
A: We have a fully-equipped hazardous material warehouse and comply with fire prevention regulations to safely store and supply hazardous materials, providing support for safe handling and procurement.