Products and solutions

Powder coating metering and control equipment

Coat SystemizerReference ID 5-071Powder coating equipment

Related keywords

Powder coating equipmentCoat Systemizer

Overview / Summary Note

Match powder feeding through recovery to the process.

This group of equipment manages the feed quantity of powder coating. Select detection, control, and feeding methods according to the application.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of equipment classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

For considering powder-coating workability and configurations for color changes and recovery.

Main applications and requirements

  • Powder coating processes
  • Recovery and feeding system configuration
  • Reviewing color-change work

Characteristics and mechanisms

01

The role of this category

This group of equipment manages the feed quantity of powder coating. Select detection, control, and feeding methods according to the application.

02

Establish powder flow

Separate the roles of feeding, deposition, and recovery, and combine the necessary equipment.

03

Consider product changeovers

Consider cleaning and replacement methods according to the frequency of color and material changes.

Basic information and general technical explanation

From powder deposition to coating film formation

In electrostatic powder coating, charged powder is deposited on the workpiece by electrostatic forces and then forms a coating film in the heating process. Consider powder feeding, charging, deposition on the workpiece, and heating as a continuous process. Because conditions for consideration vary with part geometry and powder coating used, check combinations with peripheral equipment as well as specifications of individual machines. Identify the necessary configuration according to the intended finish and operating method.

Checks for selection and introduction

Check the workpiece, powder, throughput, color-change frequency, and existing equipment configuration.

Support from CoatureVietnam

By sharing the target workpiece, current equipment, and work you want to review, you can consult us about the conditions to confirm and how to proceed with evaluation. The specific scope of support is confirmed according to the details.

Related resources, Helpful Information and FAQ

Related Helpful Information

Types of powder coatings

Introduces thermosetting and thermoplastic systems and coating film formation through heating.

Basics of electrostatic spray coating

Introduces how electrically charged paint adheres to a workpiece and the types of electrostatic coating methods.

Related trouble prevention and remedies

Process and application relevance08-012

Moisture and oil cause particle defects and blockages in powder coating

Why read this: To examine how moisture and oil in powder and supply air relate to particles and blockages.

Process and application relevance07-013

Why Powder Does Not Enter Recesses in Powder Coating: The Faraday Cage Effect

Why read this: To check geometry and electrostatic conditions when powder does not readily enter recesses.

Condition to check: When coating recesses by electrostatic powder coating

Process and application relevance07-014

Thicker Is Not Always Better in Powder Coating: Back Ionization and Recoating

Why read this: To examine the relationship between film thickness, recoating and electrostatic conditions.

Condition to check: When considering thick films or recoating in electrostatic powder coating

Common consultation questions

Can I consult you even if detailed conditions have not yet been decided?

Yes. Please share what you know about the target workpiece, current equipment, and work you want to review. Consultation can begin by organizing the information needed for evaluation.

Consultation and inquiries

Please share what you know about the application and any issues you are experiencing.

Information to prepare

  • Target workpiece and process
  • Current equipment
  • What you would like to discuss

When contacting us, please quote Reference ID: 5-071

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.