Products and solutions

Coatings for mitigating stress corrosion cracking in stainless steel

Paint VoyagerReference ID 1-010Anticorrosive coatings

Related keywords

Anticorrosive coatingsPaint Voyager

Overview / Summary Note

Review surface conditions that can lead to cracking in stainless steel.

A group of coatings intended to suppress stress corrosion cracking in stainless steel. Select a product family according to service temperature, considering environments involving chlorides. Distinguish the phenomenon being addressed from ordinary rust prevention and measures against corrosion under insulation.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider these when the effects of salt, chemicals, or temperature changes on stainless-steel piping and tanks are a concern.

It is important to check for cracking, residual stress, and equipment service conditions, and clarify the roles of equipment assessment and surface protection.

Main applications and requirements

  • Surface protection of stainless-steel piping and tanks
  • Considering prevention in equipment environments involving chlorides
  • Selecting stress-corrosion-cracking measures according to service temperature

Characteristics and mechanisms

01

Focus on chloride effects

The aim is to suppress cracking while accounting for chlorides affecting the stainless-steel surface.

02

Select product families by temperature

Resin systems and service conditions differ between ambient- and high-temperature ranges.

03

Combine with equipment management

Coordinate measures while distinguishing corrosion and crack inspection, environmental management, and surface protection.

Basic information and general technical explanation

Stress corrosion cracking progresses when multiple conditions coincide

Stress corrosion cracking involves the material, tensile stress, and corrosive environment. Even stainless steel may be affected when chloride exposure coincides with certain temperature and humidity conditions.

Coating is not a method for repairing cracks that have already formed. Assess equipment integrity, then check the coating's service-temperature classification, surface treatment, and inspection method.

Checks for selection and introduction

Check the equipment's condition and select a protective specification suited to the environment and temperature.

Conditions to check when selecting

  • Stainless-steel grade, surface condition, and presence of cracks
  • Sources of chloride contact, operating temperature, and wet conditions
  • Type suited to service temperature, and application and inspection methods

Support from CoatureVietnam

Please share the stainless-steel grade, equipment condition, and salt and temperature conditions. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Why apply paint in multiple layers?

Introduces the roles of primers and topcoats and their combination within the complete coating system.

Adhesion and causes of peeling

Introduces adhesion to the substrate, moisture at the interface and stresses within a coating film.

Related trouble prevention and remedies

Process and application relevance06-006

Stainless steel resists rust, but is not necessarily easy to coat

Why read this: To check stainless steel surface condition and its suitability for coating.

Process and application relevance02-009

How to Read Test Data Correctly: Specification Values Alone Cannot Resolve Shop-Floor Problems

Why read this: To distinguish test conditions from actual service conditions and clarify evaluation items.

Condition to check: Confirm individual suitability for stress-corrosion cracking against product documentation and the actual conditions

Common consultation questions

Can existing cracks also be repaired by coating?

This measure is separate from crack repair. For existing cracks, first check equipment integrity and perform necessary repairs, then consider protection through coating.

Consultation and inquiries

Please share the stainless-steel grade, equipment condition, and salt and temperature conditions. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the stainless-steel grade, equipment condition, and salt and temperature conditions
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-010

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.