Products and solutions

Powder coating for reinsulating coil ends

Paint VoyagerReference ID 1-052Insulating coatings

Related keywords

Insulating coatingsPaint Voyager

Overview / Summary Note

Restore insulation to coil ends after welding.

This powder coating reinsulates coil-end welds in rectangular-wire motors. As an application that restores coverage lost during welding, it is considered together with heat resistance, temperature changes, vibration, oil contact, and electrical requirements. Evaluation of part geometry and curing conditions is important.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this coating when insulating conductors exposed after rectangular-wire joining or selecting coverage suited to loads during motor operation.

Check weld geometry and the connection to existing coverage, and establish a process that continuously covers the required area.

Main applications and requirements

  • Coil-end welds in rectangular-wire motors
  • Reinsulation of conductors exposed after joining
  • Part evaluation including heat, vibration, and oil contact

Characteristics and mechanisms

01

For reinsulating welds

Consider applications that cover the required area where existing insulation has been lost.

02

Account for thermal changes and mechanical loads

Evaluate loads during use together, including heating and cooling, vibration, and contact.

03

Check effective film thickness and continuity

Inspect thin films, voids, and coverage connections at complex coil ends.

Basic information and general technical explanation

Evaluation including insulation boundaries and weld geometry

Welds have protrusions, steps, and boundaries with existing coverage, so their film-thickness and void distributions differ from those of flat panels. It is important to inspect the required insulation area as well as appearance.

Test values for material heat and oil resistance apply to specific conditions. Assess suitability as a finished part through evaluation including the actual oil, temperature history, vibration, and electrical loads.

Checks for selection and introduction

Clarify the reinsulation area and operating loads, and check the joints as well.

Conditions to check when selecting

  • Geometry of rectangular wire, welds, and existing coverage
  • Coating area, film thickness, curing, and inspection for voids and defects
  • Operating temperature, oil, vibration, and voltage withstand requirements

Support from CoatureVietnam

Please share coil-end geometry, the reinsulation area, and thermal, oil, and electrical conditions. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Electrical insulating paints

Introduces the role of electrically insulating coating films and evaluation considerations, including temperature and humidity.

Types of powder coatings

Introduces thermosetting and thermoplastic systems and coating film formation through heating.

Related trouble prevention and remedies

Process and application relevance08-012

Moisture and oil cause particle defects and blockages in powder coating

Why read this: To review moisture and oil in the powder, compressed air and storage environment when identifying causes of particles and blockages.

Process and application relevance07-015

Baking Ovens, Cooling, and Reclaimed-Powder Control in Powder Coating

Why read this: To check baking, cooling and the handling of recovered powder against the selected process.

Condition to check: Recovered-powder management applies when a recovery process is used

Process and application relevance02-009

How to Read Test Data Correctly: Specification Values Alone Cannot Resolve Shop-Floor Problems

Why read this: To examine test data and evaluation conditions for the required appearance and functionality.

Common consultation questions

Can coil suitability be determined from the material's voltage withstand capability?

Evaluation of the finished geometry is required. Check film-thickness distribution, defects, boundaries with existing coverage, and the operating environment together.

Consultation and inquiries

Please share coil-end geometry, the reinsulation area, and thermal, oil, and electrical conditions. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: coil-end geometry, the reinsulation area, and thermal, oil, and electrical conditions
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-052

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.