Products and solutions

High-heat-resistance powder coating for impregnation insulation between conductors

Paint VoyagerReference ID 1-051Insulating coatings

Related keywords

Insulating coatingsPaint Voyager

Overview / Summary Note

Insulation by impregnation between conductors as well.

This powder coating is considered for impregnation insulation between conductors used at high temperatures. Unlike primary insulation covering conductor exteriors, it is intended for applications that distribute resin between conductors. Confirm gaps, heating, impregnation condition, and electrical requirements together.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this coating when improving insulation between fixed conductors or reviewing impregnation conditions for parts used at high temperatures.

Because externally visible coverage alone cannot reveal the internal condition, check gap filling and unimpregnated areas.

Main applications and requirements

  • Impregnation insulation between conductors
  • Material selection for electrical components exposed to high temperatures
  • Considering coating and heating processes such as fluidized-bed dipping

Characteristics and mechanisms

01

Emphasize impregnation between conductors

Check in the target structure whether the resin reaches the necessary gaps.

02

Evaluate insulation at high temperatures

Consider electrical properties together with changes caused by heat.

03

Match structure and process

Check how gap dimensions, heating, and coating method affect the filling condition.

Basic information and general technical explanation

Surface coverage and internal impregnation require separate checks

Flow when the powder melts and the time until curing affect impregnation. Internal voids may remain under conditions such as narrow gaps or difficulty venting air.

In addition to electrical evaluation, use cross-sections or other methods to confirm that resin reaches the required areas. Also check the high-heat-resistance classification against actual part temperatures and service-life requirements.

Checks for selection and introduction

Prepare a method to check internal impregnation and match it to thermal and electrical requirements.

Conditions to check when selecting

  • Conductor structure, gaps, and required impregnation area
  • Heating and coating method, flow, and curing conditions
  • Void inspection, voltage withstand capability, and temperature and service-life requirements

Support from CoatureVietnam

Please share the conductor structure, area to be impregnated, and operating temperature. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Electrical insulating paints

Introduces the role of electrically insulating coating films and evaluation considerations, including temperature and humidity.

Types of powder coatings

Introduces thermosetting and thermoplastic systems and coating film formation through heating.

Related trouble prevention and remedies

Process and application relevance08-012

Moisture and oil cause particle defects and blockages in powder coating

Why read this: To review moisture and oil in the powder, compressed air and storage environment when identifying causes of particles and blockages.

Process and application relevance07-015

Baking Ovens, Cooling, and Reclaimed-Powder Control in Powder Coating

Why read this: To check baking, cooling and the handling of recovered powder against the selected process.

Condition to check: Recovered-powder management applies when a recovery process is used

Process and application relevance02-009

How to Read Test Data Correctly: Specification Values Alone Cannot Resolve Shop-Floor Problems

Why read this: To examine test data and evaluation conditions for the required appearance and functionality.

Common consultation questions

Will increasing the exterior film thickness also insulate the interior?

Exterior thickness alone does not reveal the impregnation condition. Confirm the structure and process that allow resin to reach the interior, together with the inspection method.

Consultation and inquiries

Please share the conductor structure, area to be impregnated, and operating temperature. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: the conductor structure, area to be impregnated, and operating temperature
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-051

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.