Products and solutions

Low-pressure automatic air spray gun

Coat SystemizerReference ID 5-079Air spray guns

Related keywords

Air spray gunsCoat Systemizer

Overview / Summary Note

Match atomization and operation to the coating process.

This low-pressure air spray gun is considered for automatic application of waterborne and solvent-based coatings.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of equipment classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

For reviewing coating finish or workability through gun selection.

Main applications and requirements

  • Manual and automatic spray coating
  • Gun replacement
  • Reviewing feeding methods

Characteristics and mechanisms

01

The role of this category

This low-pressure air spray gun is considered for automatic application of waterborne and solvent-based coatings.

02

Select according to coating and application quantity

Check the gun and feeding method based on viscosity and required output.

03

Match the workpiece and operation

Identify geometry, coating area, working orientation, and automation conditions.

Basic information and general technical explanation

How air atomizes a coating

Air spraying uses compressed-air flow to turn coating material into fine droplets and spray them onto a surface. The balance of coating material and air and the spray pattern affect deposition and finish. When selecting a gun, consider part geometry, coating properties, and the area to be coated together. Also check feeding conditions and working space, and consider combinations that consistently provide the required coating film.

Checks for selection and introduction

Check the coating, viscosity, application quantity, workpiece, air supply, and coating-feed method.

Support from CoatureVietnam

By sharing the target workpiece, current equipment, and work you want to review, you can consult us about the conditions to confirm and how to proceed with evaluation. The specific scope of support is confirmed according to the details.

Related resources, Helpful Information and FAQ

Related Helpful Information

Related trouble prevention and remedies

Process and application relevance07-003

Sagging, roughness and poor surface texture in spray coating are not just material problems

Why read this: To investigate sagging, roughness and poor texture through atomization, distance, pressure and speed.

Process and application relevance09-007

Select coating guns to suit the coating material and quality requirements

Why read this: To check the combination of guns and supply methods against paint, viscosity, geometry and quality requirements.

Process and application relevance09-018

Narrow Hoses and Small Fittings Reduce Coating Quality

Why read this: To check hoses and fittings up to the gun and the air supply during spraying.

Common consultation questions

Can I consult you even if detailed conditions have not yet been decided?

Yes. Please share what you know about the target workpiece, current equipment, and work you want to review. Consultation can begin by organizing the information needed for evaluation.

Consultation and inquiries

Please share what you know about the application and any issues you are experiencing.

Information to prepare

  • Target workpiece and process
  • Current equipment
  • What you would like to discuss

When contacting us, please quote Reference ID: 5-079

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.