Products and solutions

Thermally conductive insulating powder coating for thick films

Paint VoyagerReference ID 1-055Insulating coatings

Related keywords

Insulating coatingsPaint Voyager

Overview / Summary Note

Combine insulation and thermal conduction while securing thickness.

This thermally conductive insulating powder coating is intended for thick-film use. Consider applications that transfer heat from parts while forming a layer that resists electrical conduction. When comparing with insulating paper, tape, and similar materials, evaluate required film thickness, contact structure, and thermal resistance together.

COATING / PRODUCTS & SOLUTIONS
Illustrative concept diagram · Illustration of coating film and substrate classifications
This is not a photograph, dimensional drawing or performance dataset for an actual product.

When to consider it

Consider this coating when the insulation layer of an electrical component impedes heat dissipation or when you want to combine insulation and thermal management with thick coverage.

Identify coating film thickness and contact surfaces as well as thermal conductivity, and check where heat flows throughout the entire part.

Main applications and requirements

  • Thick-film insulation of electrical components
  • Comparing methods with insulating paper, tape, and similar materials
  • Part design combining thermal conduction and voltage withstand capability

Characteristics and mechanisms

01

An insulating layer that transfers heat

Consider this as a design combining electrical insulation and thermal conduction.

02

Evaluate under thick-film conditions

Distinguish thick-film and thin-film types, and check at the film thickness and curing conditions suited to the selected product.

03

Check the heat-transfer path as well

Evaluate at part level, including contact with the cooling side, structure, and heat generation.

Basic information and general technical explanation

Thermal conductivity and thermal resistance are different quantities

Even if material thermal conductivity is high, increasing coating film thickness tends to increase thermal resistance. It is important to combine the required insulation thickness with ease of heat transfer.

Contact-surface condition and cooling-side structure also affect effectiveness. Do not promise a temperature reduction based solely on representative material values; confirm temperature and electrical evaluation on actual parts.

Checks for selection and introduction

Identify the required insulation thickness and heat-transfer path, and evaluate the finished part.

Conditions to check when selecting

  • Voltage withstand capability, required coverage thickness, and part geometry
  • Heat generation, contact surfaces, and cooling structure
  • Pretreatment, film thickness, curing, and thermal and electrical evaluation

Support from CoatureVietnam

Please share insulation requirements, part heat generation and cooling structure, and required film thickness. Consultation can begin by sharing the conditions and organizing the documents and evaluation items needed to assess suitability. The scope of support for testing, implementation, and supply is confirmed individually.

Related resources, Helpful Information and FAQ

Related Helpful Information

Electrical insulating paints

Introduces the role of electrically insulating coating films and evaluation considerations, including temperature and humidity.

Types of powder coatings

Introduces thermosetting and thermoplastic systems and coating film formation through heating.

Related trouble prevention and remedies

Process and application relevance08-012

Moisture and oil cause particle defects and blockages in powder coating

Why read this: To review moisture and oil in the powder, compressed air and storage environment when identifying causes of particles and blockages.

Process and application relevance07-015

Baking Ovens, Cooling, and Reclaimed-Powder Control in Powder Coating

Why read this: To check baking, cooling and the handling of recovered powder against the selected process.

Condition to check: Recovered-powder management applies when a recovery process is used

Process and application relevance02-009

How to Read Test Data Correctly: Specification Values Alone Cannot Resolve Shop-Floor Problems

Why read this: To examine test data and evaluation conditions for the required appearance and functionality.

Common consultation questions

Does high thermal conductivity always mean better cooling?

It also depends on coating film thickness and the part's heat-transfer path. Compare temperatures on actual parts including contact and cooling conditions.

Consultation and inquiries

Please share insulation requirements, part heat generation and cooling structure, and required film thickness. You are welcome to consult us using whatever information is currently available.

Information to prepare

  • Conditions to confirm: insulation requirements, part heat generation and cooling structure, and required film thickness
  • Current conditions and issues observed
  • Desired finish or improvement

When contacting us, please quote Reference ID: 1-055

Prepare a consultation message

Copy the text below, add your on-site situation and send it to us via the Contact page.

Let's clarify where to start checking.

You can summarize the situation on site and what you want to confirm even before choosing a product.